Installation - Commercial Electric CE-2701-WH Use And Care Manual

Motion sensor light controller
Hide thumbs Also See for CE-2701-WH:
Table of Contents

Advertisement

Installation

1
Installing and Wiring the Motion Sensor
WARNING: Turn the power off at the circuit breaker or
fuse. Place tape over the circuit breaker switch and verify
power is off at the light fixture.
CAUTION: Keep the sensor at least 1 in. (25 mm) away
from the bulbs.
For installation, the sensor head must be rotated as shown in the next two steps for proper operation.
Remove the existing light fixture by removing the
screws holding the cover-plate to the junction box.
Undo the wire nuts and remove the existing motion
sensor (if applicable) by unscrewing it from the
cover-plate.
Screw your new Commercial Electric motion sensor
into the cover-plate.
Connect the junction box wires to the light control
wires. The red wire from the sensor should be attached
to the black wire or wires coming from the light fixture
and secured with a wire nut.
The white wires from the house wiring, the new motion
sensor and the light fixture should all be connected
together and secured with a wire nut.
The black wire from the new motion sensor should be
connected to the black house wiring coming from the
junction box and secured with a wire nut.
If applicable, attach the ground wire from your house
to the ground screw on the light fixture; or to the
ground wire coming from the fixture with a wire nut.
Replace the screws to reattach the light fixture to the
junction box.
NOTE: Firmly pull on the mounting bracket to verify it is
securely mounted to the junction box. If necessary, use the
screws that were removed from the existing light fixture.
NOTE: Do NOT mix different types of bulbs operated
by this motion sensor; for example, LED, CFL or halogen.
Further, do NOT mix dimmable and non-dimmable bulbs.
Mixing bulbs may cause problems with the operation of
the product.
NOTE: In order to use the Hi-Lo accent and security
lighting feature, you MUST use DIMMABLE bulbs!
Tighten the lock nut (1) and screw (2)
if necessary.
1
Wires from Junction Box
Black
Red
(Load)
5
Please contact 1-877-527-0313 for further assistance.
2
Ground
Black White
(L)
(N)
White
HOMEDEPOT.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ce-2701-bz10023150021002314998

Table of Contents