Table of Contents
Advertisement
Quick Links
Item #1002315002
Model #CE-2701-WH
Item #1002314998
Model #CE-2701-BZ
USE AND CARE GUIDE
MOTION SENSOR LIGHT
CONTROLLER
Questions, problems, missing parts?
Before returning to the store, call Commercial Electric Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
THANK YOU
We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this motion
sensor. We strive to continually create quality products designed to enhance your home. Visit us online to see our full
line of products available for your home improvement needs. Thank you for choosing Commercial Electric!
Advertisement
Table of Contents
Related Manuals for Commercial Electric CE-2701-WH
Summary of Contents for Commercial Electric CE-2701-WH
- Page 1 THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this motion sensor. We strive to continually create quality products designed to enhance your home. Visit us online to see our full...
-
Page 2: Table Of Contents
Table of Contents Table of Contents ........2 Tools Required ........3 Safety Information ........2 Package Contents ........4 Precautions Mounting Locations .......4 Warranty ...........3 Installation ..........5 5-Year Warranty ........3 Operation...........7 Specifications ...........3 Care and Cleaning ........10 Pre-Installation .........3 Troubleshooting ........10 Planning Installation ......3 Safety Information PRECAUTIONS WARNING: Turn the power off at the circuit breaker or... -
Page 3: Warranty
Warranty 5-YEAR WARRANTY Contact the Customer Service Team at 1-877-527-0313 or visit www.homedepot.com. Specifications Detection Range Up to 70 ft. (21 m) - Varies with surrounding temperature Sensing angle Up to 270° Time delay 1, 5 or 10 minutes HI-LO timer OFF, Dusk-to-Dawn, Timer (Note: Compatible dimmable bulbs needed to use the HI-LO feature) Operating modes... -
Page 4: Package Contents
Pre-Installation (continued) PACKAGE CONTENTS Part Description Quantity Motion sensor Lock nut MOUNTING LOCATIONS □ Determine the mounting location - a wall or under an eave. □ Position the sensor head (A) in the general direction of the desired sensor coverage. Wall Mount Eave Mount □... -
Page 5: Installation
Undo the wire nuts and remove the existing motion sensor (if applicable) by unscrewing it from the cover-plate. □ Screw your new Commercial Electric motion sensor into the cover-plate. Wires from Junction Box □ Connect the junction box wires to the light control wires. - Page 6 Installation (continued) For parallel switching connection, refer to the connection diagram for proper installation. □ One or more motion sensor can be wired to multiple LED light fixtures, so all lights will turn on at the same time when motion is detected by one of the sensors. Total Wattage of all lights being used added together must not exceed 100W.
-
Page 7: Operation
Operation Lamp Adjustment □ Follow the instructions that came with your light fixture for mounting and adjusting the light fixture. □ Keep regular lamps at least 1 in. (25 mm) from the sensor. Halogen lamps should be kept at least 2 in. (51 mm) from the sensor. - Page 8 Operation (continued) Testing and Adjusting the Motion Sensor □ Turn on power and allow the motion sensor to warm up for about 60 seconds. Switch the knob to Test to go into TEST mode. Regardless of whether it is day or night, the lights will come on for approximately 2-3 seconds, every time the sensor detects motion.
- Page 9 Operation (continued) Adjusting the HI/LO Light Level HI level security lighting and LO level accent lighting. HI-LO feature is off. Works with motion sensor after dark at 100% brightness. Dusk-to-dawn timer: Lights will come on automatically at dusk at approximately 25% brightness and stay on until dawn.
-
Page 10: Care And Cleaning
Operation (continued) Using Manual Override Mode Manual mode overrides the motion sensor and “ON-TIME” control so the lights will operate in “ON” mode at full brightness. This feature only works at night for 6 hours. The motion sensor will reset to motion sensing mode. Manual mode can be toggled on and off using a wall switch. - Page 11 Troubleshooting (continued) Problem Possible Cause Solution The light comes on for no □ □ The motion sensor may be sensing Re-aim the motion sensor. apparent reason. small animals or automobile traffic. □ □ The HI-LO switch is set to Dusk-to- The light fixture is operating Dawn or Dusk Timer mode.
- Page 12 Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
Need help?
Do you have a question about the CE-2701-WH and is the answer not in the manual?
Questions and answers