Advertisement
Inspect the equipment for shipping damage. If damaged, notify the transportation company and request a damage inspection.
Handle the system with care. Damage can occur if dropped or set on sharp, uneven projections on the fl oor. Do not turn the system upside down.
An analysis of your water should be made prior to the selection of your water conditioning equipment. Your dealer will generally perform this service for you,
and may send a sample to the factory for analysis and recommendations. Enter your below for a permanent record.
Hydrogen sulfi de (H
S) must be tested for at the well site. For accuracy, the sample must be drawn with the pump RUNNING and the test be completed
2
within ONE minute after the sample is drawn.
There are several different fi lter media which can be used in this fi lter. Each is designed to improve a particular aesthetic problem. NONE OF THEM SHOULD
BE USED TO MAKE NON-POTABLE WATER SAFE TO DRINK. The following descriptions indicate not only what the media is designed to do, but also points out
their limitations.
TABLE OF CONTENTS
SECTION
1
2
3
4
5
6
7
SECTION 1: BEFORE INSTALLATION
Inspecting And Handling Your Filter:
Make Sure Your Water Has Been Thoroughly Tested:
IMPORTANT NOTE:
IMPORTANT NOTE:
Analysis Of Your Water
Hardness
Iron (Fe)
Manganese (Mn)
pH
Tannins (Humic Acid)
Hydrogen Sulfi de (H
S)
2
Other_______________
Other_______________
DESCRIPTION
BEFORE INSTALLATION
SPECIFICATIONS AND OPERATING DATA
_____gpg
_____gpg
_____ppm
_____
_____ppm
_____ppm
_____
_____
1-1
Advertisement
