Table of Contents
Advertisement
OMNILUX™ MINI EYE BRIGHTENER
The LEDs are driven by an integrated 3.7V, 37mAh Lithium
Polymer battery.
The battery is charged via a magnetic 2 pin, 4mm to USB A
connector that plugs into a standard 5v USB A power adaptor.
The device cannot be operated while in charging mode.
The charging status of the device is indicated by a single
indicator LED on the rear of the Eye Brightener devices and
the treatment LEDs.
In charging mode.
i. Solid green – battery is fully charged.
ii. Solid orange – battery charging.
The Eye Brightener device contains a simple ON/OFF
button ( ) on the rear of the device that switches the LEDs
ON/OFF. The treatment time is 10 minutes. The device
automatically turns OFF after the 10-minute treatment
cycle. The user may stop the treatment program during
the 10 minutes by pressing the ON/OFF button.
The LED device is worn on the face and held in place by
an adhesive hydrocolloid patch. The adhesive hydrocolloid
patch is impregnated on both sides with an elastomer and
hydrogenated petroleum resin that acts as an adhesive.
The hydrocolloid contains CMC Carboxymethyl cellulose
(Cellulose Gum), Styrene/Isoprene Copolymer, Homopolymer,
Hydrogenated Rosin, Paraffinum Liquidum (Mineral oil),
PET, Niacinamide, Sodium Hydroxide, Sodium Hyaluronate,
Pentaerythritol Tetrakis and Oligopeptide-10.
You are supplied with a set of 14 adhesive hydrocolloid
patches for treatment, one of which must be used to carry
out a Photosensitivity patch test before starting your
treatment course.
6
Advertisement
Table of Contents
