Page 3
It is mandatory that users of this device read and comprehend all information in this User Guide prior to use of the Omnilux™ Mini Skin Corrector device. You must follow all the instructions in the User Guide. Please contact us if you have any comments about the Skin...
USER GUIDE Before using the Skin Corrector device you must carry out a sensitization test and wait 6 hours. Who should use Skin Corrector device Thank you for choosing the Skin Corrector device. The Skin Corrector device is suitable for adults wishing to treat pigmentation problems such as age spots, pigmentation, and blemishes.
Page 6
OMNILUX™ MINI SKIN CORRECTOR The LEDs are driven by an integrated 3.7V, 37mAh Lithium Polymer battery. The battery is charged via a magnetic 2 pin, 4mm to USB A connector that plugs into a standard 5v USB A power adaptor. The device cannot be operated while in charging mode.
USER GUIDE treatment course. The equipment is not used to make measurements of any sort, or to draw any conclusions regarding the indication to treat. The equipment does not require checks on the light output as the LEDs do not dim with age to any practical extent.
Page 8
OMNILUX™ MINI SKIN CORRECTOR women is unknown. • DO NOT use the Skin Corrector device if you have an allergy to Silicone or Polyethylene terephthalate. The treatment surfaces of the Skin Corrector device contain medical grade silicone and Polyethylene terephthalate.
USER GUIDE please visit: www.omniluxled.com Photosensitivity is a common side effect of various medications. These can include certain antibiotics, chemotherapy drugs, and diuretics. If you are unsure about any medication, you may be taking consult your healthcare provider. Other substances not listed above can also cause photosensitivity.
Page 10
OMNILUX™ MINI SKIN CORRECTOR cause damage to the device or harm to the user. • TURN OFF and REMOVE the Skin Corrector device immediately if it feels hot or your skin feels uncomfortably warm. DO NOT continue treatments and contact customer services.
USER GUIDE • DO NOT use the Skin Corrector device if the device, packaging, or cable are damaged in any way. • DO NOT use the Skin Corrector device any longer if it shows any signs of damage to the material through wear and tear.
OMNILUX™ MINI SKIN CORRECTOR instructions. • DO NOT use any other cleansing products other than those stated in the cleaning instructions. Use of other cleansing products may damage the Skin Corrector device. • Store the Skin Corrector device at room temperature in dry conditions, away from direct sunlight.
USER GUIDE should return to normal within 1-2 hours. Some users have reported skin flaking or peeling, associated pruritis and dryness. This is transient and fades within a few days. Temporary headaches may occur immediately following the light treatment. Although this device emits levels of visible and infrared light that are considered to be safe for the skin, if you have adverse reactions after using the device that do not resolve, you should stop using the device immediately.
OMNILUX™ MINI SKIN CORRECTOR or components are damaged or have been previously used. DO NOT use the Skin Corrector device if you notice device or connecting parts or components are damaged. Charging the Skin Corrector device Before use, fully charge the device.
USER GUIDE Charging Status of the Skin Corrector device The Skin Corrector device uses a single display LED on the rear of the LED device and treatment LEDs to indicate the status of the battery. Solid Green – Battery is fully charged. Solid Orange –...
OMNILUX™ MINI SKIN CORRECTOR Unpeel the device side of the backing paper off the adhesive hydrocolloid patch. Place the sticky side of the adhesive hydrocolloid patch onto the LED side (white) of the Skin Corrector device. Ensure the adhesive hydrocolloid device aligns with the shape of the Skin Corrector device.
USER GUIDE interference. Treatment Recommendations: For the treatment of problems such as age spots, pigmentation and blemishes the best results are seen by treating for 3-5 times a week for 6 weeks. Maintenance treatment should be carried out as required, according to lifestyle and skin condition. Carrying out a treatment DO NOT use the Skin Corrector device without a Hydrocolloid.
Page 18
OMNILUX™ MINI SKIN CORRECTOR Peel the face side of the backing paper from the adhesive strip. Using a mirror position the Skin Corrector device over the treatment area. 10. Switch ON the Skin Corrector device. The device will automatically switch OFF after 10 minutes. You may stop the treatment at any time by pressing the ON/OFF button.
USER GUIDE How to use the Hydrocolloid Patches SIDE ONE - TO FACE SIDE ONE - TO FACE SIDE ONE - TO DEVICE SIDE ONE - TO DEVICE Step Peel the device side of the hydrocolloid patch. � FACE SIDE DEVICE SIDE Step-to-step diagram for using the Hydrocolloids...
Page 20
OMNILUX™ MINI SKIN CORRECTOR Step Step Once secured to the device, peel the Attach it to the face side of the hydrocolloid patch. � LED device. � Step Once secured to the device, peel the face side of the hydrocolloid patch. �...
Page 21
USER GUIDE Step Press firmly on the face in the desired treatment area. � Re-order Refill packs of adhesive Hydrocolloid patches can be www.omniluxled.com purchased from Part number Description Quantity HCB01 The Skin Corrector 20 pcs per Box device adhesive hydrocolloid patches...
OMNILUX™ MINI SKIN CORRECTOR Care and Maintenance • The lifetime of the Lithium battery can be maximized by allowing it to fully charge and then fully discharge during regular use. • Store the Skin Corrector device at room temperature in dry conditions.
USER GUIDE • DO NOT use water to clean the Skin Corrector device. • DO NOT use the device if you think it has come into contact with water. Disposal/Recycling DO NOT dispose of the Skin Corrector device or charging cable at a domestic waste facility. The adhesive hydrocolloid patch can be disposed of in general household waste.
Page 24
OMNILUX™ MINI SKIN CORRECTOR Problem Possible Cause Action When the Skin Insufficient battery Connect the 2-pin connection Corrector device to complete a cable to the port on the upper is switched on the treatment. side of the LED patch. Insert the...
If the actions suggested fail to fix the problem, or the problem reoccurs, and the Skin Corrector device is within the warranty period please return to your place or purchase or contact the Omnilux Customer Service email: info@omniluxled.com • DO NOT attempt to investigate any further.
OMNILUX™ MINI SKIN CORRECTOR • Total Intensity: 30mW/cm • Total Device Dimensions: Max diameter 55mm x 3mm (±5%) (Circular) • Program time: 10 minutes +/- 11 Seconds • Operating Temperature: 0°C to 30°C • Storage and Transport Temperature: -5°C to 55°C •...
Page 27
USER GUIDE multiple use. Conforms to certain EC Directives on health, safety, and environmental protection standards. CE stands for ‘Conformité Européenne’. Conformity to UK Directives on health, safety, and environmental protection standards. UKCA stands for UK Conformity Assessed. Manufacturer. Date of manufacture. Keep dry.
Shows the lower and upper humidity limits. The cardboard packaging that the Skin Corrector device came in can be recycled. Product shall not be disposed of with normal household waste (2012/19/EU). Input- 5V (USB A). Australian sponsor details (AUS only) Warranty Please register your warranty at www.omniluxled.com...
What to do if your product is faulty If the product should become faulty within the warranty period, contact your place of purchase. iSMART Developments Ltd or its authorised distributor reserves the right to replace a defective product with the most compatible product currently available.
Page 30
iSMART Developments Ltd 129 Green Lanes Sutton Coldfield West Midlands B73 5LT United Kingdom User Guide - 2023 .06 .14 DOC 3778 V0...
Need help?
Do you have a question about the MINI and is the answer not in the manual?
Questions and answers