Page 3
It is mandatory that users of this device read and comprehend all information in this User Guide prior to use of the Omnilux™ Mini Eye Brightener device. You must follow all the instructions in the User Guide. Please contact us if you have any comments about the Eye...
USER GUIDE Before using the Eye Brightener device you must carry out a sensitization test and wait 6 hours. Who should use the Eye Brightener device Thank you for choosing the Eye Brightener device. The Eye Brightener device is suitable for adults wishing to treat facial wrinkles.
Page 6
OMNILUX™ MINI EYE BRIGHTENER The LEDs are driven by an integrated 3.7V, 37mAh Lithium Polymer battery. The battery is charged via a magnetic 2 pin, 4mm to USB A connector that plugs into a standard 5v USB A power adaptor.
USER GUIDE The equipment is not used to make measurements of any sort, or to draw any conclusions regarding the indication to treat. The equipment does not require checks on the light output as the LEDs do not dim with age to any practical extent.
Page 8
OMNILUX™ MINI EYE BRIGHTENER • DO NOT use the Eye Brightener device if you have an allergy to Silicone or Polyethylene terephthalate. The treatment surfaces of the Eye Brightener device contain medical grade silicone and Polyethylene terephthalate. • DO NOT use the Eye Brightener device if you have an allergy to Hydrocolloid bandages or any of the ingredients in the hydrocolloid patches outlined above.
USER GUIDE medications. These can include certain antibiotics, chemotherapy drugs, and diuretics. If you are unsure about any medication, you may be taking consult your healthcare provider. Other substances not listed above can also cause photosensitivity. • Common examples of these substances are: St John’s Wort, coal tar, deodorants, antibacterial soaps, artificial sweeteners, naphthalene (mothballs), petroleum products, brightening agents found in...
Page 10
OMNILUX™ MINI EYE BRIGHTENER warm. DO NOT continue treatments and contact customer services. • STOP using the Eye Brightener device during a treatment if you experience headaches or changes in vision. DO NOT continue treatments and contact customer services. • DO NOT use the Eye Brightener device without first removing creams, lotions, or make-up BEFORE treatment.
USER GUIDE • DO NOT use the Eye Brightener device any longer if it shows any signs of damage to the material through wear and tear. • DO NOT leave the Eye Brightener device unattended when it is switched on. Accidental mishandling of the device could lead to the risk of fire or burns.
OMNILUX™ MINI EYE BRIGHTENER • Store the Eye Brightener device at room temperature in dry conditions, away from direct sunlight. • Don’t use the Eye Brightener device in Direct Sunlight. • Take care when using the Eye Brightener device around young children. Electrical cables can present a strangulation hazard.
USER GUIDE light treatment. Although this device emits levels of visible and infrared light that are considered to be safe for the skin, if you have adverse reactions after using the device that do not resolve, you should stop using the device immediately. If you experience a side effect that is not described above or is of greater severity than described above, please STOP using the device immediately and contact a Healthcare...
OMNILUX™ MINI EYE BRIGHTENER Charging the Eye Brightener device Before use, fully charge the device. The Eye Brightener device uses an integrated lithium-ion polymer battery. When the LED device is connected to the power supply do not attempt to use the device as the LEDs will not illuminate.
USER GUIDE Solid Orange – Battery is charging (Charging Mode). Low Battery Mode – Identified by Treatment LEDs Flashing – There is not enough battery charge to complete a treatment cycle please recharge your device. Sensitization test Before carrying out your first treatment you must carry out a sensitization test to see if you are sensitive to light or the adhesive hydrocolloid patch.
OMNILUX™ MINI EYE BRIGHTENER hydrocolloid patch. Peel the face side of the backing paper from the adhesive hydrocolloid patch. Attach the Eye Brightener device to the inside of your left or right forearm and push down gently. Switch ON the Eye Brightener device and allow it to run for a full treatment (10 minutes) 10.
USER GUIDE Carrying out a treatment DO NOT over flex the Eye Brightener device. Although it is flexible, it is not designed to withstand excess bending or folding. DO NOT use the Eye Brightener device without a Hydrocolloid. Ensure the Eye Brightener device is fully charged before commencing a treatment session.
OMNILUX™ MINI EYE BRIGHTENER may stop the treatment at any time by pressing the ON/OFF button. 11. After the treatment, carefully remove the Eye Brightener device and adhesive hydrocolloid patch from the treatment area. 12. Remove the adhesive hydrocolloid patch from the Eye Brightener device and discard in general household waste.
Page 19
USER GUIDE Step-to-step diagram for using the Hydrocolloids Step Peel the device side of the hydrocolloid patch. � Step Step Peel the device side of the hydrocolloid patch. � Attach it to the LED device. �...
Page 20
OMNILUX™ MINI EYE BRIGHTENER Step Once secured to the device, peel the face side of the hydrocolloid patch. � Step Once secured to the device, peel the face side of the hydrocolloid patch. � Step Press firmly on the face in the desired treatment area.
USER GUIDE Re-order Refill Adhesive Hydrocolloid patches can be purchased from www.omniluxled.com Part number Description Quantity HCR01 The Eye Brightener 20 per Box device adhesive hydrocolloid patches Care and Maintenance • The lifetime of the Lithium battery can be maximized by allowing it to fully charge and then fully discharge during regular use.
OMNILUX™ MINI EYE BRIGHTENER those specified in the Technical Specification. Cleaning the Eye Brightener Device • Before cleaning ensure that the charging cable is disconnected from the Eye Brightener device and that the device is not charging • Clean the Eye Brightener device with a water-based wipe.
Contact your place of purchase not illuminated and Brightener device to arrange a return or contact does not illuminate is faulty. the Omnilux Customer Service email: info@omniluxled.com during charging. No red or infrared light from the Eye Brightener device. No red or infrared...
If the actions suggested fail to fix the problem, or the problem reoccurs, and the Eye Brightener device is within the warranty period, please return to your place or purchase or contact the Omnilux Customer Service email: info@omniluxled.com • DO NOT attempt to investigate any further.
USER GUIDE • Total Intensity: 30mW/cm • Total Device Dimensions: Approx 68mm max (L) x 36mm max (W) • Program time: 10 minutes +/- 11 Seconds • Operating Temperature: 0°C to 30°C • Storage and Transport Temperature: -5°C to 55°C •...
Page 26
OMNILUX™ MINI EYE BRIGHTENER Conforms to certain EC Directives on health, safety, and environmental protection standards. CE stands for ‘Conformité Européenne’. Conformity to UK Directives on health, safety, and environmental protection standards. UKCA stands for UK Conformity Assessed. Manufacturer. Date of manufacture.
USER GUIDE Shows the lower and upper humidity limits. The cardboard packaging that the Eye Brightener device came in can be recycled. Product shall not be disposed of with normal household waste (2012/19/EU). Input- 5V (USB A). Australian sponsor details (AUS only) Warranty Please register your warranty at www.omniluxled.com...
What to do if your product is faulty If the product should become faulty within the warranty period, contact your place of purchase. iSMART Developments Ltd or its authorised distributor reserves the right to replace a defective product with the most compatible product currently available.
Page 29
iSMART Developments Ltd 129 Green Lanes Sutton Coldfield West Midlands B73 5LT United Kingdom User Guide - 2023.06.14 DOC 3777 V0...
Need help?
Do you have a question about the MINI and is the answer not in the manual?
Questions and answers