Table of Contents
Advertisement
VIEWING FIRMWARE VERSION - SMOG CHECK / I/M PROGRAM LOCATION
VIEWING THE FIRMWARE VERSION
1. Select Firmware Version in the Main
Menu, then press MENU/ENTER
The
displays.
The screen shows the Scan Tool's
current firmware version, bootloader
version and database version.
2. Press MENU/ENTER
the Main Menu.
SELECTING THE SMOG CHECK OR I/M PROGRAM
LOCATION
1. Select Smog Check or I/M Program Location in the Main Menu,
then press MENU/ENTER
In cases where the Scan Tool has not determined the vehicle
make and model year (either by decoding the VIN or through
manual selection during code retrieval), the Select Vehicle
screen displays. The Select Vehicle screen shows the three
most recently tested vehicles.
To select a previously tested vehicle, highlight the desired
vehicle, then press MENU/ENTER
To select a new vehicle, highlight
Select New Vehicle, then press
MENU/ENTER
-
The Select Year screen displays.
Select the desired vehicle model
year, then press MENU/ENTER
to
continue,
Vehicle to return to the Select
Vehicle
previously tested vehicle.
-
The
displays.
Select the desired vehicle make,
then press MENU/ENTER
continue.
-
The Confirm Vehicle screen
displays.
If the information shown is correct
for the vehicle under test, select
Yes, then press MENU/ENTER
Proceed to step 3.
Firmware
Version
to return to
.
or,
select
screen
and
Select
Make
Additional Functions
.
screen
.
. Proceed to step 2.
Saved
select
a
screen
to
.
41
Advertisement
Table of Contents
