Table of Contents
Advertisement
To select a new vehicle, highlight
Select New Vehicle, then press
MENU/ENTER
-
The Select Year screen displays.
Select the desired vehicle model
year, then press MENU/ENTER
to
continue,
Vehicle to return to the Select
Vehicle
screen
previously tested vehicle.
-
The
displays.
Select the desired vehicle make,
then press MENU/ENTER
continue.
-
The Confirm Vehicle screen displays.
If the information shown is correct
for the vehicle under test, select
Yes, then press MENU/ENTER
Proceed to step 10.
If the information shown is not correct
for the vehicle under test, or if you
wish to reselect the vehicle, select No,
then press MENU/ENTER
return to the Select Vehicle screen.
10. Refer to DISPLAY FUNCTIONS on page 3 for a description of
display elements.
In
the
definitions,
Freeze Frame Data, a small arrow
is shown in the upper/lower right-
hand corner of the Scan Tool
display
presence of additional information.
If a definition for the currently displayed code is not available,
an advisory message shows.
The Scan Tool will display a code only if codes are present. If no
codes are present, the message "No Powertrain DTCs or Freeze
Frame Data presently stored in the vehicle's computer" displays.
The Scan Tool is capable of retrieving and storing up to 32
codes in memory, for immediate or later viewing.
.
or,
select
and
select
Select
Make
case
of
long
or
when
viewing
area
to
indicate
Using the Scan Tool
CODE RETRIEVAL PROCEDURE
Saved
a
screen
to
.
to
code
the
Press
to view FF data
25
Advertisement
Table of Contents
