Blue Clean BC2N1HSS Assembly, Care And Use Instructions page 9

ASSEMBLY INSTRUCTIONS
7
G
Place power washer unit (F) into position on the lower
frame (G).
9
K
N
1
Pull back on collar at one end of high pressure hose
(N).Push firmly to connect hose to spray gun (K). Twist
collar to secure. Confirm hose is locked into spray gun
by slightly pulling on them. The hose is now securely at-
tached to spray gun.
95509_IM_BC 2N1 HSS_ENG-FR-SP（Thankyou letter）.indd 9
F
2
3
N
8
G
F
Pull upward on latches that are located on sides of
lower frame (G). Once upper latch is flush with the lower
lip, push down until lower latch clicks into place.
10
1
Locked
Unlocked
Locking Spray Gun (before Lance installation) To lock
trigger of spray gun (K), point gun away from you and
turn dial to lock ("3" and "9" position). Squeeze or pull
trigger to make sure it is locked. Always leave in locked
position when not in use. This ensures the gun is in
"safe" mode until it is ready for use. Turn dial to unlock
("12" and "6" position) to release spray gun trigger.
Note: The trigger lock prevents trigger from being
accidentally engaged.
K
9
2020/5/22 下午4:45