Congratulations on the purchase of your BLUE CLEAN POWER WASHER! Your BLUE CLEAN POWER WASHER is a power tool in every sense of the word that may be used outside your house and in. It is one of the finest most powerful home-use power washers in the marketplace today.
• To avoid mishaps or injury, always use the trigger safety lock when not using the power washer even if the spraying stops for a moment. • The power washer is equipped with a Ground Fault Circuit Interrupter (GFCI) which greatly reduces the chance of electric shock while the unit is in use.
Page 5
securely connected. • Never allow the power washer pump to run for more than one minute, after you have turned off the water supply. This can cause the motor and pump to overheat and fail. • Never use lances or other parts that have not been supplied with your power washer.
SSembly Detergent Bottle • After unpacking the BLUE CLEAN POWER WASHER, lay out parts and accessories. Familiarize yourself with the parts in the package by comparing them to those listed on the “PACKAGE CONTENTS” page. • The BLUE CLEAN POWER WASHER requires some minor assembly.
Page 8
• To release the hose from the spray gun, press the blue button on the underside of the gun toward the trigger guard. The hose will slide out from the connection. Spray Gun • To lock the trigger of the spray gun aim the gun away from you and push the lock button from right to left, (Fig.
black collar onto the clear adapter (Fig. 15), it will “click” into place. The water is now connected to your power washer. • To remove the water hose, simply pull back on the blue collar and it will slide off the clear adapter. Note: this can be done at any time.
Page 10
• Turn off the unit • Turn off the water supply to the unit • Relieve any pressure trapped in the hose by squeezing the trigger 2-3 times, and then lock the spray gun by pushing the lock button from left to right. • Take off the adjustable lance.
and chemical action is very effective and can be better than scrubbing if applied properly. Always spray detergent on a dry surface, do not pre-soak area. Wetting the surface first dilutes the detergent and reduces its cleaning ability. Do not allow detergent to dry on surface. On vertical surfaces being cleaned, apply detergent to lower surfaces and work your way up to prevent detergent from causing streaks in the dirt and grime.
ALL climates. It also assists with protection from internal corrosion. The Blue Clean part # is: PW64511 (16oz. bottle). Pump Saver Instructions Follow the previous storage instructions for your power washer. To prevent staining, protect the surface under the power washer from any excess fluid.
roubleShootIng and Unit will not turn on. Make sure the power washer is in the “OFF” position. Plug in the electrical cord to a grounded 120 volt outlet (no electrical extension cord should be used). If the electrical cord will not plug into your outlet, your electrical outlet is not properly grounded and should not be used.
Cleaning and troubleshooting tips, manuals and other helpful information are available on our website. For parts and accessories for your Blue Clean washer, visit www.arblueclean.com. Ordering is easy and all major credit cards are accepted. A.R. NORTH AMERICA, INC.
Need help?
Do you have a question about the 240 and is the answer not in the manual?
Questions and answers