UCL SWIFT TEK-1 Training Manual page 41

NORTH AMERICA
QUICK START GUIDE
INTRODUCTION
The HFM1 Handheld 400x Inspection Microscope is used to inspect fi ber terminations and provide the most
critical view of fi ber end faces. This 400x handheld microscope shows scratches and contamination with its
clear optical performance and integrated laser safety fi lters and is ideal for examining ferrule polish quality.
ACCESSORIES
Three "AAA" batteries included
2.5MM Ferrule 1.25MM Ferrule
INSTALLING
HFM1
Focus Control
Eyepiece
Optical Lens Adaptor
NOTE
Use lens paper and cleaning liquid
!
to clean the sensor's surface,
remember to rotate the lens paper
in a clockwise direction.
Handheld 400x Handheld 400x
Inspection Microscope Inspection Microscope
Light Source Entrance
Battery House
LED Switch
Laser Safety
Adaptor Interface