UCL SWIFT TEK-1 Training Manual page 22

NORTH AMERICA
QUICK START GUIDE
Connector Adapter
1
FEATURES
CONNECTOR ADAPTER
1
(Interchangeable)
2
LOW BATTERY INDICATOR
3 2KHZ TONE INDICATOR
SAVE BUTTON
4
5
RCL BUTTON
6
USB BUTTON
LCD SCREEN
7
MEASUREMENT MODE
8
INDICATOR - dB/dBm
OPM1
2kHz Tone
Indicator
Low Battery 3
Indicator
2
Measurement
Mode Indicator
7
LCD Screen
The OPM1 comes with a 2.5mm universal adapter. Additional adapters
are available from SWIFT.
"BATT" will appear on the LCD screen when the CR2 3V battery needs
to be recharged or replaced, depending on the battery type.
A beep will sound and show "2 kHz" on the LCD once a 2 kHz modulated
signal is recognized.
Over 4,000 readings may be saved on the OPM1. Each time the save
button is pressed, the current reading will be saved to internal storage. The
display flashes the indexed location where the reading has been saved.
Toggles through the saved readings on the device. The indexed location,
wavelength, and reading will flash on-screen.
When the OPM1 is connected via USB to a computer running SWIFT
brand software, pressing this button will transfer all saved data points
into the software for reporting.
The screen displays the measured value, selected wavelength, and
status indicators.
dB is a loss measurement. dBm is an absolute power measurement.
Optical Power Meter
Save Button
USB Button
4
RCL
Button
5
10
8
dB/dBm
Button
9
Wavelength
Button
6
11
Power
Button