Table of Contents
Advertisement
Saving data
Current values can be copied from the PLC to the Touch Panel main memory
records
and saved on a data medium. The time at which the data record was saved is
also stored.
Loadig data
Proceed as follows to load data records from data media in the main memory
records
of the Touch Panel and download them to the PLC:
TP27, TP37 Equipment Manual
Release 01/00
Step
1
Touch the Recipe field in standard screen Data Record Processing
and Transmission.
Select the recipe for the data record to be saved from the selection
window.
2
Touch the Data Medium field.
Select the data medium on which the data record is to be saved
from the selection window .
3
Select the name of the data record to be saved (see Editing a data
record, Step 3, Page 8-9).
4
Touch the button
If a data record with this name does not exist, it is created. If a data
record with this name already exists, the system asked whether the
existing data record should be overwritten.
5
Confirm by touching
or cancel the action by touching
6
Repeat steps 1 to 5 for each data record to be saved on the data
medium.
Step
1
Touch the Recipe field in standard screen Data Record Processing
and Transmission.
Select a recipe for the data record to be loaded from the selection
window.
2
Select the name of the data record to be loaded (see Editing a data
record, Step 3, Page 8-9).
3
Touch the Data Medium field.
Select the data medium from which the data record is to be loaded
from the selection window .
4
Touch the button
Action
OK
ESC
Action
Recipes
8-11
Advertisement
Table of Contents
