Table of Contents
Advertisement
Figure 13-4 Touch Panel in MPI Download mode
Fault diagnosis
A fault occurring during commissioning or operation is normally displayed on
the Touch Panel by means of a system message.
Appendix C of this manual contains a list of some of the most important sys-
tem messages and explanations on how to eliminate them.
Data backup
The operating data of the Touch Panel (tag values, message buffer) is stored in
a buffered SRAM and retained even in the event of a power failure. Operating
data is not lost if the power supply is turned off or fails.
TP27, TP37 Equipment Manual
Release 01/00
M P I D O W N L O A D
MPI Baud Rate:
187.5 kBaud
MPI OP Station Address:
Tel.:
Download Address:
SERIAL
BOOT
DOWNLOAD
CONFIGURATION
Commissioning
2
FF
FF
13-7
Advertisement
Table of Contents
