GreenWorks SN-200-T Owner's Manual page 13

ASSEMBLY INSTRUCTIONS
ASSEMBLING THE HANDLE (See Figure 2)
• Align the holes (4) on the middle handle (2) and the lower handle (3). Insert the bolts (5), and
use the handle knobs (6) to tighten them.
• Align the hole on the middle handle (2) and the upper handle (1). Insert the bolts (7) and
tighten them with the handle knobs (8) provided.
NOTE: If the upper handle is loose or separated from the middle handle, tighten the handle knobs by turning
them clockwise. Do not overtighten the handle knobs.
Fig. 2
(1)
(2)
(8)
(3)
(6)
11 11
(7)
(5)
(4)