Cleaning And Sterilising; Assembling The Electric Breast Pump - Philips AVENT SCF315 User Manual

3 Cleaning and
sterilising
Before you use your breast pump for
the first time and for every time, you
must disassemble, wash, and sterilise
all the breast pump parts that come
into contact with your breast milk. (see
c , d , e , f , g , l in Overview
chapter)
Before you use the bottle and its
parts for the first time and for every
time,you must also disassemble, wash
and sterilise. (see h , i , j , k in
Overview chapter)
Caution
Never wash or sterilise the pump
•
motor, the silicone tube, the cap,
and the power adapter. These
components do not come into
contact with your breast milk. You
can wipe those parts clean with a
soft cloth.
You can also use the dishwasher
(top rack only) or hand wash in
warm, soapy water, and then rinse
thoroughly. We recommend you to
sterilise all the parts contacting with
breast milk in our Philips Avent steam
steriliser, or by boiling for 5 minutes.
Avoid to contact with the vessel
directly to protect the parts from
deformation.
Caution
Take care when cleaning the valve
•
and the silicone diaphragm. If it
gets damaged, your breast pump
will not function properly.
To clean the valve, rub it gently
•
between your fingers in warm
soapy water. Do not insert objects
as this may cause damage.
4 Assembling the
electric breast
pump
To assemble the pump, follow the
steps below.
Note
Make sure that you clean and
•
sterilise the pump as instructed in
this user manual.
Make sure that you assemble the
•
pump correctly as nstructed in this
user manual.
To avoid leakage, remove the
•
residue around the rim before
assembling. Put the bottle onto
the pump body, and do not over-
tighten.
Wash your hand thoroughly before
•
you take sterilised components.
- 8 -