Tech Specs: Photo - GoPro SPBL1 Manual

Tech Specs: Video
AUTO LOW LIGHT
Regulatory Model Number SPBL1 can tell if there isn't enough light for
your shot and will automatically lower the frame rate to improve video
quality. This is
especially helpful when you're moving in and out of low-light conditions.
Auto Low Light is set to On by default. It works with all resolutions
when shooting at 50 or 60 fps.
Turning Off Auto Low Light
1. From the Video screen, tap the settings.
2. Tap Low Light.
LOOPING INTERVAL
You can set your GoPro to record 5 (default), 20, 60, or 120 minute loops.
It can also be set to Max, which will record until your SD card is full before
looping back to record over the start of the video.
120

Tech Specs: Photo

SUPERPHOTO
SuperPhoto automatically analyzes the scene and intelligently applies
the best image processing for the shot.
Depending on the lighting, movement in your shot, and other conditions,
SuperPhoto will choose one of four options:
High Dynamic Range (HDR)
Our improved HDR takes and combines multiple photos into a single shot
to bring out the details in scenes that mix bright light and shadows.
Local Tone Mapping
Enhances photos by boosting the details and contrast only where
it's needed.
Multi-Frame Noise Reduction
Automatically combines multiple shots into a single photo with less
digital distortion (noise).
No Additional Processing
Captures photos with no advanced processing when conditions
are perfect.
SuperPhoto only works for single photos. Because of the extra time
needed to apply image processing, it may take a little longer to process
and save each shot.
Heads Up: SuperPhoto does not work with RAW photos, Protune,
or Exposure Control.
121