GoPro SPBL1 Manual page 51

Mounting Your GoPro
4. Attach the mounting buckle to the mount.
a. Flip up the mounting buckle plug.
b. Slide the buckle into the mount until it clicks into place.
c. Press the plug back down so that it sits flush with the buckle.
100
Mounting Your GoPro
USING THE ADHESIVE MOUNTS
Follow these guidelines when attaching adhesive mounts to helmets,
vehicles, and gear:
• Attach mounts at least 24 hours before you use them.
• Only attach the mounts to smooth surfaces. They won't stick properly
to porous or textured surfaces.
• Firmly press mounts into place. Be sure the adhesive is in full contact
with the surface.
• Only use on clean, dry surfaces. Wax, oil, dirt, or other debris will
weaken the bond, and you could lose your camera.
• Attach mounts in dry room temperature conditions. They won't stick
properly in cold or damp environments or on cold or damp surfaces.
• Check state and local regulations and laws to ensure that attaching
a camera to equipment (such as hunting gear) is permitted. Always
comply with regulations that restrict the use of consumer electronics
or cameras.
WARNING: To avoid injury, do not use a tether when mounting
your camera on a helmet. Do not mount the camera directly on
skis or snowboards.
For more information about mounts, visit gopro.com.
101