Cooking Functions - Ninja WOODFIRE PRO OG750 Series Owner's Manual

Outdoor grill & smoker with built-in thermometer
Table of Contents

Advertisement

USING THE BUILT-IN THERMOMETER – CONT'D
HOW TO CORRECTLY INSERT THE THERMOMETER
FOOD TYPE:
PLACEMENT
Steaks
• Insert thermometer
Pork chops
horizontally into the center
of the thickest part of the
Lamb chops
meat.
Chicken breasts
• Make sure the thermometer
Burgers
is close to (but not touching)
Tenderloins
the bone and away from any
Fish fillets
fat or gristle.
• Make sure the tip of the
thermometer is inserted
straight into the center of
the meat, not angled toward
the bottom or top of it.
NOTE: The thickest part
of the fillet may not be
the center. It is important
that the end of the
thermometer hits this area
so that desired results are
achieved.
Whole chicken
• Insert thermometer
horizontally into the thickest
part of the breast, parallel to
(but not touching) the bone.
• Make sure the tip reaches
the center of the thickest
part of the breast and
doesn't go all the way
through the breast into the
cavity.
NOTE: DO NOT use the thermometer with frozen protein or for cuts of meat thinner than 1 inch.
8
ninjakitchen.com
CORRECT
INCORRECT

COOKING FUNCTIONS

IMPORTANT: Review all warnings at the beginning of this Owner's Guide before proceeding.
Grill
1
Place grill on a flat, level surface.
2 Open the hood and install the grill grate
by positioning it flat on top of the heating
element so it sits into place.
NOTE: If you are using the thermometer, refer
to the Using the built-in Thermometer section.
3 Install the grease tray by sliding it into place at
the back of the grill.
4
If you plan to use the Woodfire Flavor
Technology, lift the smoke box lid and
using the pellet scoop, fill the smoke box
with Ninja Woodfire Pellets to the top, then
close the lid. DO NOT overflow the smoke box.
5 Make sure the grill is plugged in and rotate the
dial clockwise from the OFF position to select
the GRILL function.
6
If adding woodfire flavor, press the
WOODFIRE FLAVOR TECHNOLOGY
button.
7 The default temperature setting will display,
to adjust temperature if desired, use the
/ TEMP buttons.
8 To adjust cook time, use the / TIME buttons.
9 Press START to begin preheating. If using
Woodfire Flavor Technology, the pellets will go
through an ignition cycle (IGN), then the grill
will begin preheating (PRE).
NOTE: While preheating is strongly
recommended for best results, you can skip
it by pressing and holding the START/STOP
button for 4 seconds. "ADD FOOD" will flash
across the screen. Open the hood and place
ingredients on the grill grate. Once the hood
is closed cooking will begin and the timer
will start counting down. Skip to step 12 for
further instructions.
10 When preheating is complete, the grill will
beep and ADD FOOD will appear on the display.
11 Open the hood and place ingredients on the
grill grate. Once the hood is closed, cooking will
begin and the timer will begin counting down.
NOTE: Want to cook with the hood open?
After you've added food, keep the lid open,
the timer will begin to count down after 30
seconds, and you will be cooking with bottom
heat only.
12 When cook time reaches zero, the grill will
beep and DONE will appear on the display.
13 Remove food from the grill grate.
Smoker
1
Place grill on a flat, level surface.
2
Open the hood and install the grill grate
by positioning it flat on top of the heating
element so it sits into place.
NOTE: If you are using the thermometer, refer
to the Using the built-in Thermometer section.
3
Install the grease tray by sliding it into place
at the back of the grill.
4
Lift the smoke box lid. Using the pellet
scoop, fill the smoke box with Ninja Woodfire
Pellets to the top, then close the lid. DO NOT
overflow smoke box.
5
Open the hood and place ingredients on the
grill grate. Close the hood.
6
Make sure the grill is plugged in and rotate
the dial clockwise from the OFF position to
select the SMOKER function.
NOTE: Woodfire Flavor Technology is
automatically enabled when using the
Smoker function.
7
The default temperature setting will display.
To adjust temperature if desired, use the
/ TEMP buttons.
8
To adjust cook time, use the / TIME buttons.
9
Press START to begin cooking. There is no
preheat time for the Smoker function.
10 When cook time reaches zero, the grill will
beep and DONE will appear on the display.
11 Remove food from the grill grate.
ninjakitchen.com
9

Advertisement

Table of Contents
loading

Table of Contents