Draytek Vigor2927 Quick Start Manual page 8

Interface Description
Restore the default settings. Usage: Turn on the router
(ACT LED is blinking). Press the hole and keep for more than
Factory
5 seconds. When you see the ACT LED begins to blink rapidly
Reset
than usual, release the button. Then the router will restart
with the factory default configuration.
Connecter for a USB device (for 3G/4G USB Modem or
USB
printer or thermometer).
Connecter for local network devices or modem for
WAN1
accessing Internet.
Connecter for local network devices or modem for
accessing Internet.
WAN2 / P6
It is a switchable port. It can be used for LAN connection or
WAN connection according to the settings configured in
WUI.
LAN P1-P5 Connecters for local network devices.
PWR Connecter for a power adapter.
ON/OFF Power Switch.
3