1. Safety Before using, operating and maintaining this device, please read this manual carefully. 1) The device must be used within the scope mentioned in the manual. If the user does not operate according to the instructions or use the device for other purposes, the manufacturer will not bear any responsibility.
4. Preparation NOTICE 4.1 Installation 1) Patients with a history of retinal disease should consult an ophthalmologist before operating this device and follow all necessary safety precautions. Refer to “Fig. 2 ” Do not use the device for intramural lighting or dental trans-illumination, as excessive heat may be generated, causing mucous membrane burns or pulp TIPS: irritation.
5. Operation WARNING: Make sure install the original light hood correctly in order to avoid the harm of blue light to the eyes. It is forbidden to aiming light at eyes directly. 5.1 Power ON/OFF Long press the ON/OFF button to turn on/off. TIPS: 2) Press the Mode/Time button to set the working time or cycles.
6. Cleaning, Disinfection and Sterilization 7. Maintenance 1) Before each use, check whether the Optical fiber and other components are 6.1 Cleaning damaged. If so, please stop using it or replace the components 1) Handpiece: Wipe off any visible residue with a clean damp cloth wrung immediately.
Non-AP / APG type Classification by degree of safety in use of displays "< There are residues on the Cleaning the Optical fiber end face flammable an aesthetic gas mixed with air or 500mW/cm " end surface of the Optical with nitrous oxide fiber Protection against Electric Shock...
Guidance and manufacture's declaration - electromagnetic emission DB686 Honor is intended for use in the electromagnetic environment specified below. The Warning/Caution NOTE customer or the user of DB686 Honor should assure that it is used in such an environment. Emission Compliance Electromagnetic environment - guidance...
Page 10
The DB686 Honor is intended for use in the electromagnetic environment specified below. device. The customer or the user of DB686 Honor should that it is used in such an environment. Rated maximum Separation distance according to frequency of transmitter...
Need help?
Do you have a question about the DB686 Honor and is the answer not in the manual?
Questions and answers