alandental.com User Guide Requirement Read these instructions prior to first use in order to avoid misuse and prevent damage. Hazard levels The warning and safety notes in this document must be observed to prevent personal injury and damage to the instrument.
The supplier can provide circuit diagrams, component lists, legends, calibration rules, or other materials necessary for repair by qualified technicians and repairable instrument parts designated by the manufacturer as required. Disclaimer Manufacturer will not be responsible for accidents, instrument damage, or bodily injury resulting from: Repairs made by personnel not authorized by the manufacturer.
Disposal of Medical Instruments In accordance with the principles, standards, and requirements of the country (region) in which A you are located. When disposing of the old electrical instrument ensure that pollution is not produced in the process of waste disposal.
product. Make sure that the surface of the product is absolutely dry before plugging the power cable back into the socket. After interventions on and repairs of the instrument and before re-use, have the service personnel perform safety checks on the instrument. 5.
equipment) and has been cautioned against the use of small electrical appliances (such as electric shavers, hair dryers, etc) it is recommended not to use the instrument. Safety and ef ectiveness have not been established in pregnant women and children. Clinical judgment needs to be applied by the end user of the device.
Input: AC100-240V Output: DC10V 1.5A AC adapter Frequency : 50/60Hz Control unit’s battery Lithium ion battery ( DC7.4V) Handpiece’s battery Lithium ion battery (DC 3.7V) 3.3V Speed 150-1000rpm Torque 0.6-3.9Ncm Protection against Electric Shock Type B applied part Classification of Protection against Electric S Class II (adapter) hock Control unit’s input power...
Page 9
When control unit charging, the screen displays the charging symbol and status. After 1 minute of inactivity, the symbol will disappear. You can press the ON/OFF button or touch the screen to check the charging status. When handpiece charging, charging light (orange) on the control unit flashes and the light (green) will stay on when fully charged.
Page 10
NOTE: The change will be automatically saved. alandental.com Activating Bluetooth Connect hand piece to control unit via Bluetooth. 1. Connecting Default Bluetooth is connected. Bluetooth will automatically connect when control unit and handpiece are turned on. 2. Pairing • Press to enter setup state and then press to pair Bluetooth;...
Page 11
NOTE: Priro to the Bluetooth connection, the Bluetooth indicator (blue) on the handpiece is flashing. When paired, the indicator is on. The Bluetooth connection will be saved automatically. Bluetooth pairing is only required after replacing control unit or handpiece. 3. Disconnecting alandental.com Press to enter setup state and then press...
Page 12
2. Connect File Hold down the push button on the contra-angle and insert the file Pull on the file gently to make sure it is locked. Disconnecting: Press the push button and pull out the file. WARNING: • Make sure the connection is not damaged. •...
Need help?
Do you have a question about the C-SMART-I PILOT and is the answer not in the manual?
Questions and answers