Page 1
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ +7(495)109-02-08 sales@bbrc.ru www.bbrc.ru FR-32R Modules User’s Manual Warranty All products manufactured by ICP DAS are warranted against defective materials for a period of one year from the date of delivery to the original purchaser.
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ +7(495)109-02-08 sales@bbrc.ru www.bbrc.ru 1. Introduction The FR-32R has 32-channel relay outputs with serial FRnet interface. Unlike traditional digital I/O board, each FRnet series I/O module has an FRnet interface which can let the module become a distributed remote I/O module.
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ +7(495)109-02-08 sales@bbrc.ru www.bbrc.ru Specifications Table 1. Specifications of FR-32R module Characteristics Specifications 250Kbps Transfer speed 2.88 ms Scan time 400m max. Transfer distance Number of channels Form A, SPST...
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ +7(495)109-02-08 sales@bbrc.ru www.bbrc.ru 3. Hardware description 3.1. Appearance of FR-32R Speed and Hold state setting (JP9) Group number Termination setting (JP2) resistor setting CH17~CH32 CH1~CH16 External Power and Connectors for FRnet...
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ +7(495)109-02-08 sales@bbrc.ru www.bbrc.ru 3.2. Pin Assignment External Power supply and signals connection Additional FRnet signal connectors All FRnet A signals are internally connected together, and all FRnet B signals are connected together, too. Following two connectors are used for FRnet quick connection.
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ +7(495)109-02-08 sales@bbrc.ru www.bbrc.ru I/O connectors CN1: CN2: The CMnn and NOnn in these figures represent the COM and the N.O. pins of channel nn, respectively.
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ +7(495)109-02-08 sales@bbrc.ru www.bbrc.ru 3.4. Address (Group number) Setting The group number setting table for 16-group system is shown as follows. Each setting includes two consecutive group numbers. S4, S5, and S6 are used for 128-group system. Although the settings for 128-group system are omitted here, they are similar to other jumpers that construct a binary code for address.
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ +7(495)109-02-08 sales@bbrc.ru www.bbrc.ru 3.5. Communication Speed Setting settings 250K communication rates are listed as follows. The settings for 250K bps and 1M bps communication rates are listed in the following table. The standard speed (250K bps) is set by having a jumper at CK0 position.
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ +7(495)109-02-08 sales@bbrc.ru www.bbrc.ru 3.6. LED Indicators There are several LED indicators located on the module. They are one Power LED, one Communication Run LED, one Error LED, 32 output LEDs and one termination resistor LED.