Advertisement
Quick Links
Installation Guide
Pressure Control
Type KP 15A
Refrigerants
R717, HCFC and non-flammable HFC
Ambient temperatures / Mounting requirements
t
min .: -40 °F (-40 °C)
1
t
max.:
65 °C (149 °F)
1
CAUTION:
Do not mount the control in a position where
dirt, sediment or oil will affect the operation of the control.
Cutting ring
© Danfoss A/S (AC-MCI / jmn), 2012-11
Test pressure (P
Connections
Mounting
DKRCI.PI.C00.C1.22 / 520H6064
)
test
p
max.
test
35 bar (510 psig)
PS/MWP
p
max.
test
20 bar (285 psig)
PS/MWP
060-007866
1
Advertisement
Related Manuals for Danfoss KP 15A
Summary of Contents for Danfoss KP 15A
- Page 1 65 °C (149 °F) Connections CAUTION: Do not mount the control in a position where dirt, sediment or oil will affect the operation of the control. Cutting ring 060-007866 Mounting © Danfoss A/S (AC-MCI / jmn), 2012-11 DKRCI.PI.C00.C1.22 / 520H6064...
- Page 2 A-B close on LP drop = Bellows movement on pressure rise HP signal option: See label for current wiring inside cover A-D close on HP rise = Bellows movement on pressure drop DKRCI.PI.C00.C1.22 / 520H6064 © Danfoss A/S (AC-MCI / jmn), 2012-11...
- Page 3 Note: Do not select automatic reset if safety of the system requires manual reset. Note: Selected reset configuration may be protected against unauthorized actions applying a seal. Adjustment spindle(s) location © Danfoss A/S (AC-MCI / jmn), 2012-11 DKRCI.PI.C00.C1.22 / 520H6064...
- Page 4 Setting Low pressure (LP) side setting High pressure (HP) side setting KP 15A with LP man. reset only KP 15A with LP auto. reset only KP 15A with convertible LP auto./man. reset KP 15 A with HP auto./man. reset LP scale...
Need help?
Do you have a question about the KP 15A and is the answer not in the manual?
Questions and answers