Advertisement
INTERNAL STORAGE & APPS
The Android operating system on an ESX Naviceiver is an open platform that allows you to
personalize your device the way you want. After registering, you can download apps from the
Google Play Store and use them on your device.
ESX has no influence on the content or functionality of these apps. We therefore cannot assume any li-
ability for the functionality, operation or damage caused by downloading and/or using apps. ESX cannot
provide service for the apps that are subsequently installed on the device. Use is always at your own
risk. If you have any problems, please contact the app developer.
Your ESX device has internal memory with a limited capacity. By downloading apps, videos, photos
and music, for example, you fill up this memory. If the memory is full, there is a possibility that certain
apps will no longer work or will only be usable to a limited extent. In this case, you will have to delete
apps or content to restore functionality. You are responsible for managing the storage yourself. You can
usually find the remaining storage capacity under > Settings > Storage.
Important: Avoid installing too many apps or removing unused apps on the device, as these may
affect basic functionality (e.g. navigation, radio, etc.).
In the app menu under > Settings > Apps & notifications you can remove or disable specific apps.
Apps that have already been deactivated can also be reactivated there. If a particular app does not
respond or work correctly, remove the app and reinstall it.
Important: Due to increased system load and the simultaneous operation of several apps, the
device's RAM can become overloaded and usability can be very sluggish.
In this case, quit any running apps or applications. If this is not sufficient, you should restart the device.
Also check whether the device is updating in the background. In this case, just wait until these have
been carried out.
RADIO RECEPTION
Every radio is only as good as its reception. The antenna and its installation location play a
very important role in both analogue and digital radio reception. Therefore, ensure that the best
possible antenna is used.
Newer vehicles often have an original vehicle antenna for both analogue and digital radio reception. A
corresponding adapter, splitter or antenna amplifier with a separate power supply can often improve
reception performance. If such active components are already installed in your vehicle at the factory,
you must also ensure that they are supplied with power. The included DAB+ window antenna is only
recommended if a suitable fender or roof antenna is not available.
Note: If the radio reception is poor, have the reception performance checked by a specialist
workshop using a measuring device (e.g. with ESX VNA-RFE). Also make sure that all connec-
tions are connected correctly and, for example, that the connection for the FM antenna has not
been confused with the DAB antenna.
SETTING UP THE CAMERA
All ESX Smart Naviceivers are usually preset for analog CVBS cameras. If you use an original
camera that is already installed in the vehicle, a third-party camera or an analog AHD camera, the
settings in the device may need to be adjusted or changed accordingly.
Please note the relevant instructions in the enclosed "Installation Guide" (black band).
Advertisement
