Related Manuals for JB Systems INTRUDER
Summary of Contents for JB Systems INTRUDER
- Page 1 INTRUDER ENGLISH Operation Manual Other languages can be downloaded from: WWW.JB-SYSTEMS.EU Version: 1.0...
-
Page 3: Before Use
ENGLISH USER MANUAL OPERATION MANUAL ® Thank you for buying this JB Systems product. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. FEATURES •... -
Page 4: Safety Instructions
• Due to safety reasons it is prohibited to make unauthorized modifications to the unit. Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering from epilepsy. JB SYSTEMS 2/11 INTRUDER ®... -
Page 5: Overhead Rigging
No extra settings to be made in the setup menu, just follow the procedure in the user manual supplied with the WTR-DMX DONGLE from BRITEQ ® . The separate WTR-DMX DONGLE is available from WWW.BRITEQ-LIGHTING.COM (order code: B04645) JB SYSTEMS 3/11 INTRUDER ®... -
Page 6: Setup Menu
000 - 255 Tilt 000 - 255 Zoom 000 - 255 Factory Rotate 000 - 255 000 - 255 Green 000 - 255 Blue 000 - 255 White 000 - 255 All reset Off/Reset Reset Factory Off/Reset JB SYSTEMS 4/11 INTRUDER ®... - Page 7 • BO: output turns black while no DMX is detected. • Once the correct option shows on the display, press the ENTER button to confirm. Note: as soon as the input detects a DMX-signal, blackout, freeze or audio mode will be cancelled. JB SYSTEMS 5/11 INTRUDER...
- Page 8 • Use ▲/▼ buttons to select the desired mode: • 60s: Display turns off after 60s • Show: Display stays on • Once the correct option shows on the display, press the ENTER button to confirm. JB SYSTEMS 6/11 INTRUDER ®...
- Page 9 • Press the ▲/▼ buttons until the desired function is showing on the display. • Press the ENTER button: select the All Reset option • Off: No reset is performed • Run: reset the device JB SYSTEMS 7/11 INTRUDER ®...
-
Page 10: Electrical Installation + Addressing
Value 000-255 CH7 is set to 000-005 000-255 TILT CH7 is set to 000-005 000-255 Dimmer (0 - 100%) 000-004 open 005-125 Normal strobe slow to fast 126-134 open 135-255 Random strobe slow to fast JB SYSTEMS 8/11 INTRUDER ®... - Page 11 000-255 Saturation 000-255 000-009 No Function 010-050 1800K 051-091 3200K 092-132 4000K 133-173 5600K 174-214 6500K 215-255 8000K Zoom 000-255 No function 001-025 Color pulse effect 026-051 Color chase 052-077 Color fade 078-103 Red wave JB SYSTEMS 9/11 INTRUDER ®...
-
Page 12: Maintenance
• Always dry the parts carefully. • Clean the external optics at least once every 30 days. • Clean the internal optics at least every 90 days. Attention: We strongly recommend internal cleaning to be carried out by qualified personnel! JB SYSTEMS 10/11 INTRUDER ®... -
Page 13: Specifications
Size: 17.2 x 25 x 34cm (LxBxH) Weight: 6.05 kg Lux charts: Every information is subject to change without prior notice You can download the latest version of this user manual on our website: www.jb-systems.eu JB SYSTEMS 11/11 INTRUDER ®... -
Page 16: Mailing List
MAILING LIST Subscribe today to our mailing list for the latest product news! Inscrivez-vous à notre liste de distribution si vous souhaitez suivre l'actualité de nos produits! Abonneer je vandaag nog op onze mailinglijst en ontvang ons laatste product nieuws! Abonnieren Sie unseren Newsletter und erhalten Sie aktuelle Produktinformationen! Suscríbete hoy a nuestra lista de correo para recibir las últimas noticias! Inscreva-se hoje na nossa mailing list para estar a par das últimas notícias!