Loading Paper In The Bypass Tray - Sharp FO-2080 Operation Manual

LOADING PAPER

Loading paper in the bypass tray

Note
1
Open the bypass tray and extend the tray.
Note
2
Set the bypass tray paper guides to the paper width. Insert the
paper (print face down) all the way into the bypass tray.
3
Press the [TRAY SELECT] key (
Note for loading thick paper
Confirm that user program 29 is set to "2 (HEAVY PAPER)" when using thick
paper. (See page 65.)
22
• Paper must be fed narrow side first into the feed slot.
• Special papers such as transparency film, labels, and envelopes
must be fed one sheet at a time through the bypass tray.
• When copying onto transparency film, remove each copy promptly.
Do not let copies stack up.
To close the bypass tray, perform step
illustration and push the round projections at the right of the tray
until they click.
2
and then step
1 1 1
1
) to select the bypass tray.
in the
2
Print face