Table of Contents
Advertisement
5
Maintenance
5.3
Reassembling the blades
The assembly of the cleaned or new blades and the assembly of the cutter is
carried out in the reverse order of disassembly.
1
1. Put on the upper blade(2) and make sure that the springs (3) should not
be kinked and remain in the guides
2. Fix the upper blade (2) with the screws (1).
3. Push the lower blade (5) in the guides upward until the toothed rail on the
upper blade (5) pushes against the gear wheels on the axle (4).
Then turn the axle (4) clockwise with a 2.5 mm hex wrench until the lower
blade (5) is just before the upper blade (2).
4. Press the upper blade (2) inwardly and slide the lower blade (5) over the
upper blade (2) by turning the axle (4) clockwise to the maximum top.
5. Insert the plug (6) of the motor cable into the socket (7).
6. Mount the cover and attach the CSQ cutter to the printer.
After turning on the printer, the lower blade automatically aligns.
2
3
2
6
7
4
5
17
4
5
Advertisement
Table of Contents
