Table of Contents
Advertisement
MOBILITY
3.
Proceed accordingly on the other side.
4.
Carefully release the interior trim from the
tailgate, arrow 1, and, if necessary, pull the
cable with the plug from the switch unit, ar‐
row 2.
5.
Remove the interior trim.
Replacing the reversing light
1.
Turn the bulb holder in the direction indicated
on the reflector and remove it.
2.
Press the bulb gently into the bulb holder,
turn counterclockwise and remove it.
3.
Mount the bulb holder.
354
Replacing components
Online Edition for Part no. 01402722600 - VI/18
Installing the interior trim
1.
Connect the cable to the switch unit, if nec‐
essary. Make sure that the plug engages.
2.
Position the interior trim on the tailgate and
secure it with two expanding rivets.
3.
Press against the interior trim, arrows, so that
the four holding pins engage in the tailgate.
4.
Fasten the interior trim using the remaining
expanding rivets and press the pins into the
expanding rivets.
5.
Attach one side of the hinge cover on the in‐
terior trim, arrow 1, and fold the hinge cover
onto the hinge arm, arrow 2.
6.
Fasten the hinge cover using the expanding
rivet, arrow 1, and press onto the hinge cover
Advertisement
Table of Contents
