BMW 5 2019 Series Owner's Manual page 102

CONTROLS
Power windows
Safety information
WARNING
When operating the windows, body parts and
objects can be jammed. There is a risk of injury
or risk of damage to property. Make sure that
the area of movement of the windows is clear
during opening and closing.
Overview
Power windows
Safety switch
Functional requirements
The windows can be operated under the follow‐
ing conditions.
▷ Standby state is established.
▷ Drive-ready state is established.
▷ The remote control is in the car's interior.
Opening
▷ Press the switch to the resistance
point.
The window opens while the switch is being
held.
▷ Press the switch beyond the resistance
point.
102
Opening and closing
Online Edition for Part no. 01402722600 - VI/18
The window opens automatically. Pressing
the switch again stops the motion.
Convenient opening via the remote control, refer
to page 81.
Closing
▷ Pull the switch to the resistance point.
The window closes while the switch is
being held.
▷ Pull the switch beyond the resistance
point.
The window closes automatically if the door
is closed. Pulling again stops the motion.
Convenient closing via the remote control, refer
to page 82.
Closing via Comfort Access, refer to page 90.
Jam protection system
General information
If closing force exceeds a specific threshold as a
window closes, closing is interrupted.
The window opens slightly.
Safety information
WARNING
Accessories on the windows such as antennas
can impact jam protection. There is a risk of in‐
jury. Do not install accessories in the area of
movement of the windows.
Closing without the jam protection
system
In case of danger from the outside or if ice might
prevent normal closing, proceed as follows:
1. Pull the switch past the resistance point
and hold it there.