Table of Contents
Advertisement
MOBILITY
FTM Flat Tire Monitor
Concept
The system detects tire inflation pressure loss
on the basis of rotation speed differences be‐
tween the individual wheels while driving.
In the event of a tire inflation pressure loss, the
diameter and therefore the rotational speed of
the corresponding wheel changes. The differ‐
ence will be detected and reported as a flat tire.
The system does not measure the actual infla‐
tion pressure in the tires.
Functional requirements
The following conditions must be met for the
system; otherwise, reliable flagging of a loss of
tire inflation pressure is not assured:
▷
After a tire or wheel replacement, an initializa‐
tion was performed with the correct tire infla‐
tion pressure.
▷
After the tire inflation pressure was adjusted
to a new value, an initialization was per‐
formed.
Status display
The current status of the flat tire monitor can be
displayed, for instance whether the RPA is active.
Via iDrive:
1.
"My Vehicle"
2.
"Vehicle status"
3.
"Flat Tire Monitor"
The status is displayed.
Initialization required
An initialization must be performed in the follow‐
ing situations:
▷
After the tire inflation pressure has been ad‐
justed.
▷
After a tire or wheel replacement.
332
Wheels and tires
Online Edition for Part no. 01402722600 - VI/18
Performing initialization
When initializing, the set tire inflation pressures
serve as reference values in order to detect a flat
tire. Initialization is started by confirming the tire
inflation pressures.
Do not initialize the system when driving with
snow chains.
Via iDrive:
1.
"My Vehicle"
2.
"Vehicle status"
3.
"Flat Tire Monitor"
4.
Switch on drive-ready state and do not drive
off.
5.
Start the initialization with: "Perform reset"
6.
Drive away.
The initialization is completed while driving,
which can be interrupted at any time.
The initialization automatically continues when
driving resumes.
Messages
General information
When a flat tire is indicated, DSC Dynamic Sta‐
bility Control is switched on, if needed.
Safety information
WARNING
A damaged regular tire with low or missing tire
inflation pressure impacts handling, such as
steering and braking response. Run-flat tires
can maintain limited stability. There is a risk of
an accident. Do not continue driving if the vehi‐
cle is equipped with normal tires. Follow the in‐
formation on run-flat tires and continued driving
with these tires.
Advertisement
Table of Contents
