Table of Contents
Advertisement
CONTROLS
Adjusting the height
The height of the outer head restraints can be
adjusted.
▷
To lower: press the button, arrow 1, and push
the head restraint down.
▷
To raise: push the head restraint up.
After setting the height, move the head restraint
up or down slightly, making sure it engages
properly.
Removing
With through-loading system:
The outer head restraints can be removed. Only
remove the head restraint if no one will be sitting
in the seat in question.
1.
Fold down the rear seat backrest, refer to
page 275, in question.
2.
Raise the head restraint up against the resist‐
ance.
3.
Press the button, arrow 1, and pull the head
restraint out completely.
114
Seats, mirrors, and steering wheel
Online Edition for Part no. 01402722600 - VI/18
Installing
Proceed in the reverse order to install the head
restraint.
Mirrors
Exterior mirrors
General information
The mirror on the front passenger side is more
curved than the driver's side mirror.
The mirror setting is stored for the driver profile
currently in use. When the vehicle is unlocked via
the remote control, the position is automatically
retrieved if the function, refer to page 99, is acti‐
vated for this purpose.
The current exterior mirror position can be stored
using the memory function, refer to page 117.
Safety information
WARNING
Objects reflected in the mirror are closer than
they appear. The distance to the traffic behind
could be incorrectly estimated, for instance
while changing lanes. There is a risk of an acci‐
dent. Estimate the distance to the traffic behind
by looking over your shoulder.
Advertisement
Table of Contents
