Trane A952V040BU3SB Installation, Operation And Maintenance Manual page 60

D D u u c c t t C C o o n n n n e e c c t t i i o o n n s s
Upflow Furnace with Bottom and Side Returns Mounted on a
Ducted Pedestal with Side Return and Filter Box
Important: Make sure the condensate and thermostat wiring holes
are sealed on the cabinet side with the side return. The
plugs and grommets may need to be changed with those
on the opposite side of the cabinet.
Important: Make sure not to cut the cabinet in the "No Cut" area.
Note: Use Optional BAYLIFT kit to lift furnace. Follow kit instructions.
Note: The furnace bottom pedestal must be a minimum of 6" in
height.
Refer to Step 1, Step 10,
Step
21" Filter Cabinet with BAYLIFT Kit
No Cut Area
60
Step 11, Step 12, Step 13, Step
15, Step 4
Cutouts
Flush with back
of furnace cabinet
No Cut Area
14,
Upflow Furnace with Side Return
Important: Make sure the condensate and thermostat wiring holes
are sealed on the cabinet side with the side return. The
plugs and grommets may need to be changes with those
on the opposite side of the cabinet.
Important: Make sure not to cut the cabinet in the "No Cut" area.
Note: Return air on right side with the condensate on the left or return
air on left with the condensate on the right do not require a
transition.
Note: If using a filter box, use a transition, if possible, to attach the
filter box to the furnace cabinet.
Refer to
17.5" Filter Cabinet with BAYLIFT Kit
Cutouts
Flush with back
of furnace cabinet
Use four corner guides
to create cutout
No Cut Area
Step 16, Step 17, Step 18, Step 19
A952V-SVX001-1B-EN