Specifications - Makita GRH10 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Capacities
No load speed
Blows per minute
Overall length (with BL4025)
Rated voltage
Net weight
Optional accessory
Model:
Suction performance
Operating stroke
Suitable drill bit
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Concrete
Core bit
Diamond core bit (dry type)
Steel
Wood
D.C. 36 V - 40 V max
2.8 - 4.5 kg (6.2 - 9.9 lbs)
Up to 105 mm (4-1/8")
Up to 165 mm (6-1/2")
BL4020* / BL4025* / BL4040* / BL4050F / BL4080F
* : Recommended battery
DC40RA / DC40RB / DC40RC
2 ENGLISH
GRH10
20 mm (13/16")
35 mm (1-3/8")
32 mm (1-1/4")
13 mm (1/2")
26 mm (1")
0 - 1,350 /min
0 - 5,000 /min
289 mm (11-3/8")
DX16
0.24 l/min
0.77 kg (1.7 lbs)
PDC01 / PDC1200