Smeg CPF48UGMWH Manual page 12

1. Assemble the fastening bracket as shown
in the figure. Join the two parts without
tightening them too much since there will
be other adjustments to make.
2. The bracket attachment should insert into
one of the central slots at the rear.
14
Installation
3. After having positioned and leveled the
appliance, move the bracket close to the
rear of the appliance and anchor it to the
floor.
4. Lower the bracket attachment until
anchoring the appliance slot, tighten the
nuts previously assembled. The anti-tip
device works properly only if the bracket
attachment is securely anchored to the
appliance.