Alliance Laundry Systems PA20 X CONTROL Original Instructions Manual
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Washer
  5. PA20 X CONTROL
  6. Original instructions manual
Alliance Laundry Systems PA20 X CONTROL Original Instructions Manual

Alliance Laundry Systems PA20 X CONTROL Original Instructions Manual

Washer-extractors
Hide thumbs Also See for PA20 X CONTROL:
Table of Contents

Advertisement

Quick Links

Washer-Extractors
X Control
Refer to Page 8 for Model Identification
Original Instructions
Keep These Instructions for Future Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
Part No. D1676ENR11
www.alliancelaundry.com
September 2022

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PA20 X CONTROL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Alliance Laundry Systems PA20 X CONTROL

Summary of Contents for Alliance Laundry Systems PA20 X CONTROL

  • Page 1 Washer-Extractors X Control Refer to Page 8 for Model Identification Original Instructions Keep These Instructions for Future Reference. CAUTION: Read the instructions before using the machine. (If this machine changes ownership, this manual must accompany machine.) Part No. D1676ENR11 www.alliancelaundry.com September 2022...

  • Page 3: Table Of Contents

    Initialization Menu..................27 © Copyright 2022, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.
  • Page 4 Starting a Wash Program................63 The Active Program..................63 Advancing a Wash Program................64 Wash Time....................64 Program End....................64 Water Fill Process..................64 Heating Process.................... 64 Cooldown Function..................65 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 5 Failure 4: The Linen is Not Correctly Distributed in the Stage when the Ma- chine Starts Up the Spinning Sequence............ 93 Failure 5: Safety Switch High Spin............. 93 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 6 Failure 562: Export Failed................ 107 Failure 563: Import Failed................ 107 Failure 570-571: Card Reader Error............107 Failure 600-628: Software Errors.............. 108 Service Information................109 Maintenance....................109 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 7 Information for Service................109 Programmer Circuit Board................109 Instructions for Replacing the Programmer Boards......... 110 Instructions for Installing New Software............110 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 8: Safety Information

    The model number on the machine doesn’t indicate the machine type directly. It must be linked with the description of the machine type letters. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 9: Introduction

    10.5 kg / 25 lb / 105 L (100 G) PA25N 10.5 kg / 25 lb / 105 L (200 G) PA25M Table 1  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 10: Control Identification

    2. Hidden navigation button RIGHT Figure 1 Decal START CHM1612R CONFIRM THE SELECTION (ENTER) CHM1614R CANCEL THE SELECTION CHM1615R MOVE UP CHM1616R MOVE DOWN CHM1617R Table 2 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 11: Main Menu

    Attention! Preset Program Depending the machine Direct Selection 1 type, some items will Direct Selection 2 Eco Mode not be displayed. Exit CFS374R_SVG Figure 2 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 12 Submenu: ENTER button. Confirming a menu item and go to the next menu item: ENTER button. Insert a value or select another List element. CZW3R © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 Figure 3 DO NOT COPY or TRANSMIT...

  • Page 13: Basic Description Of Controls

    Setting the value of coins and currency. • The selection of the Brightness of the display. • Setting the prices of programs (including special prices). © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 14: Entering And Changing Values Utilizing The Control Keypad

    2. Use the START button to confirm the entered value. How to Get into the Setup Mode 1. Press the buttons LEFT and CANCEL THE SELECTION at the same time. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 15: 15 Wash Programs - 99 Steps

    Step 99 Wash Wash Sequence Sequence Drain/ Drain/ Extraction Extraction Sequence Sequence Tumble Tumble Tumble . . . Tumble Sequence Sequence Sequence Sequence CHM1685R Figure 6 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 16: Available Wash Sequences

    REVERSING DRAIN programmed Then program all the related functions of the Drain/Extraction se- Top Soap Dispenser Machines quence. The Cold Water Inlet Valves Available functions © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 17: Programming The Water Level

    The economic func- tion should only be used for lightly soiled and/or small- er volumes of laundry. In other cases, the program will give poor washing quality. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 18: Cabinet Freestanding 6.5-28 Kg / 14-70 Lb / 65-280 L

    9.51 gal [36 l] 10.43 gal 12.81 gal 13.60 gal 18.10 gal 19.65 gal [39.5 l] [48.5 l] [51.5 l] [68.5 l] [74.4 l] Table 4  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 19: Cabinet Hardmount 7.5-52 Kg / 20-120 Lb / 80-520 L

    135 L 180 L 240 L 280 L 332 L 520 L 2 gal [7.6 l] 2.40 gal 2.17 gal [8.2 [9.10 l] Table 5  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 20 14 gal [53 l] 15.16 gal 19.28 gal 20.74 gal 14.66 gal 21 gal [79.5 [40 l] [57.4 l] [73 l] [78.5 l] [55.5 l] Table 5  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 21 52.57 gal [130 l] [199 l] 35.80 gal 54.95 gal [135.5 l] [208 l] 37.12 gal 57.06 gal [140.5 l] [216 l] Table 5  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 22 [207 l] [327 l] 88.76 gal [336 l] (1) Economic Low Level (2) Economic High Level (3) Normal Low Level (4) Normal High Level Table 5 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 23: Programmable Water Level

    7.5 kg / 20 lb / 80 L (G- 1120 91-149 1165 factor 400) 10.5 kg / 25 lb / 105 L 1035 91-149 1075 (G-factor 400) Table 7  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 24 28 kg / 70 lb / 280 L (G- 91-149 factor 100) 28 kg / 70 lb / 280 L (G- 91-149 factor 200) Table 7  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 25: Programming The Wash Speed

    Time Limits gram the time so that the temperature will decrease with about 37.4°F [3°C] for each minute. • The maximum programmable time is 99 Seconds. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 26: Signal

    For most cases, the operator interrupts a program to fill the soap box an additional time. • The program interruption will always occur at the end of a step. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 27: Initializing The Machine

    Initialization Menu Display Mes- sage Default Information Limits Language English Language selection: English, Spanish, French,… List Table 8  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 28 99 minutes. The machine will only stop heating when the pro- grammed temperature has been reached. Table 8  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 29 Table 8  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 30 Direct selection 1 is a pre-set program which will start operating when 0..15 the LEFT button is pressed. The 0 value means there is no pre-set pro- gram. Table 8  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 31: Configuration Menu

    Only a qualified technician should change the con- figuration set up. An incorrect configuration can cause injuries and serious machine damage. C028 How to Get into the Configuration Menu © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 32: Passwords

    There is only one correct setting for machine type. If the wrong machine type was selected, replace the display board or send it to the factory for repair. Table 9  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 33 During inverter parameters loading it must be selected cor- rect motor type installed in machine. Only Hardmount machine 7.5kg / 20 lb /80L. Table 9  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 34 If a drain valve 1 with inverted function (normally closed) or a pump is No / Yes used on the machine, then this item must be set to “Yes”. Table 9  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 35 Thus you will make sure, that the ma- chine is not operated with incorrect water levels or drum ro- tational speed. Table 9  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 36: Advanced Menu

    The advanced menu contains a list of extra menus with special woolens, and will not work for a programmed temperature < functions: 86°F [30°C] . © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 37: Program Mode Lock Menu

    The access to the Program Mode can be locked by a password. It means that without password you can't have access to the Main Menu Screen. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 38: Program Lock Menu

    It avoids that programs once created get changed by somebody else. 1 NORMAL HOT 140°F [60°C] (Un- locked) 2 NORMAL WASH 95°F [35°C] (Locked) Table 12  contin- ues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 39: Weighing Menu

    Thus, the liquid soap consumption is re- duced. Table 13  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 40: Data Export / Import

    The program overview is shown. • Switch the machine into the setup mode. Refer to section How Figure 14 to Get into the Setup Mode. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 41 Special Price Pre- Only applicable to the Payment mode = Coins wash Program Blocking Blocking (disabling) of wash programs. Yes/No Enable Pr1 Table 15  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 42: Selection Of Payment Mode

    (customer) during the proc- ECB : Electronic coin selector equipped with the blocking (disa- ess of wash program selection. bling) function. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 43: Audit Data Menu

    Information about number of inserted coins 2 from last counters reset. Only read item Remote Vend XXXX Information about vend added from external payment system. Only read item Table 17  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 44 Information how many times program x was used with normal price. Only read item Program 15 XXXX Information how many times program 15 was used with normal price. Only read item Table 19 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 45 Information how many times modifier Prewash was used. Only read item Extra Rinse XXXX Information how many times modifier Extra Rinse was used. Only read item Table 21 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 46 Initializing the Machine How to Create and Adjust a Wash Program Figure 16 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 47: Programming

    Select Program Number: 1 Use the hidden navigation buttons LEFT and RIGHT to select the program number. Numbers from 1 to 15 can be selected. Table 22  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 48: Step 3: Program Step Function

    A confirmation is asked first to delete the old program. Exit Return to Main Menu Table 22 Step 3: Program Step Function Figure 19 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 49 An existing Step in the program disappears when it's deleted. A confirmation is asked first before deleting the Old Step. Exit Return to Program Menu Table 23 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 50: Step 4: Programming The Wash Part

    So with less effort, complete programs can be programmed. Refer to Basic Description of Controls • Prewash © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 51: The Prewash Sequence

    The Prewash Sequence Time. 0 - 99.5 minutes (for 0 Minutes the Prewash sequence will be skipped) (programmable in steps of 0.5 Minutes) Table 24  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 52: The Wash Sequence

    The wash action (motor "On" Time). Gentle wash action : 3 seconds. 1 - 99 seconds (The suggested default values can be adjusted at the Initialization menu) Table 25  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 53: The Cooldown Sequence

    Refer to Table 7 Drain Valve Only available on washing machines with both : a normal Open and 1 - 2 normal Closed Drain valve. Table 26  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 54: The Rinse Sequence

    No wash • Cooldown • No temperature can be programmed as a Rinse is only dedi- • Rinse cated for cold water. • Extra Rinse © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 55: The Extra Rinse Sequence

    NOTE: Extra rinse step is active only if slecial function • Rinse Extra Rinse is activated during program selection. Re- • Extra Rinse fer to Figure 24 . • Final Rinse • Soak © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 56: The Final Rinse Sequence

    No wash • Cooldown • No temperature can be programmed as a Last Rinse is only • Rinse dedicated for cold (hard) water. • Extra Rinse © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 57: The Soak Sequence

    Table 29 • Extra Rinse The Soak Sequence • Final Rinse • Prewash • Soak • Wash • Spray • Cooldown • No wash • Rinse © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 58: The Spray Sequence

    No standard water inlets can be programmed in this function. • Rinse • The liquid will be injected based on soap supply program- • Extra Rinse ming. • Final Rinse • Soak © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 59: The No Wash Sequence

    NOTE: You don’t have to program a drain sequence be- fore an extraction sequence as the water will automati- cally be drained at the extraction sequence. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 60: The Drain Sequence

    0 - 15.0 minutes (for 0 Minutes the Extract sequence will be skipped) (programmable in steps of 0.5 Minutes) Exit Return to Edit Program Menu. Table 33 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 61: The No Drain Sequence

    The drum is reversing while the water is drained. and the imbalance (tilt) function will be activated. C051 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 62 (for 0 Minutes the Static Drain sequence will be skipped) (program- mable in steps of 0.5 Minutes) Exit Return to Edit Program Menu. Table 36 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 63: Operation Menu

    At the wash sequence, it depends of the pre-programmed water inlets in which the soap dispenser you have to add soap. Refer to section The Creation of a Wash Program for more infor- mation. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 64: Advancing A Wash Program

    5. The extra free run time at the end of the spin sequence. • The display of remaining cycle time can be disabled in Pay- ment menu – item “Show Prog Time”. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 65: Cooldown Function

    Go to the chapter Troubleshooting to find out more rupted and that you have to wait until the Wash Computer al- about error handling. lows you to go on. C070 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 66: How To Handle Power Interruptions

    "Err 39 out of soap" will be shown on the display of the Wash Computer. • So the operator does not have to check the soap supply reser- voirs continuously to avoid washing without soap. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 67: Pre-Programmed Programs

    Cold Hard Direct Inlet (External liq- Water uid soap) Inlet Valve 8: Hot Soft Wa- Soap Dispens- Wash - liquid er Compart- ment "III" Table 37 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 68: Wash Programs

    4 minutes Slowdown Tumble 30 seconds W (5 seconds / (Models with- 5 seconds) out pump drain) 5 minutes (Models with pump drain) Table 38 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 69: Wash Program 2: Normal Warm 95°F [35°C]

    4 minutes Slowdown Tumble 30 seconds W (5 seconds / (Models with- 5 seconds) out pump drain) 5 minutes (Models with pump drain) Table 39 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 70: Wash Program 3: Normal Cold 59°F [15°C]

    Prewash, Extra Rinse - on request Step 1 Prewash / wash 1 -5 - 7 86°F [30°C] 3 minutes W (normal) Spin 30 seconds Table 41  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 71: Wash Program 5: Extra Wash Warm 95°F [35°C]

    9 minutes W (normal) Drain 30 seconds Step 3 Rinse 1 1 - 2 - 7 2 minutes W (normal) Drain 30 seconds Table 42  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 72: Wash Program 6: Pernament Press 95°F [35°C]

    W (normal) Drain 30 seconds Step 5 Final Rinse 1 - 4 - 7 4 minutes W (normal) Final spin/Spin 2.5 minutes Slowdown Table 43  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 73: Wash Program 7: Delicates 59°F [15°C]

    2.5 minutes Slowdown Tumble 30 seconds W (5 seconds / (Models with- 5 seconds) out pump drain) 5 minutes (Models with pump drain) Table 44 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 74: Wash Program 8: Bulky 95°F [35°C]

    5 minutes Slowdown Tumble 30 seconds W (5 seconds / (Models with- 5 seconds) out pump drain) 5 minutes (Models with pump drain) Table 45 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 75: Wash Program 9: Denim 95°F [35°C]

    5 minutes Slowdown Tumble 30 seconds W (5 seconds / (Models with- 5 seconds) out pump drain) 5 minutes (Models with pump drain) Table 46 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 76: Wash Program 10: Whites 140°F [60°C]

    4 minutes Slowdown Tumble 30 seconds W (5 seconds / (Models with- 5 seconds) out pump drain) 5 minutes (Models with pump drain) Table 47 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 77: Wash Program 11: Colors 59°F [15°C]

    4 minutes Slowdown Tumble 30 seconds W (5 seconds / (Models with- 5 seconds) out pump drain) 5 minutes (Models with pump drain) Table 48 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 78: Wash Program 12: Casual 95°F [35°C]

    Prewash, Extra Rinse - on request Step 1 Prewash / wash 1 -5 - 7 86°F [30°C] 3 minutes W (normal) Spin 30 seconds Table 50  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 79: Wash Program 14: Wool 59°F [15°C]

    5 minutes W (gentle) Drain 30 seconds Step 3 Rinse 1 1 - 2 - 7 2 minutes W (gentle) Drain 30 seconds Table 51  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 80: Wash Program 15: Rinse & Hi Spin

    2.5 minutes Slowdown Tumble 30 seconds W (5 seconds / (Models with- 5 seconds) out pump drain) 5 minutes (Models with pump drain) Table 52 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 81: Troubleshooting

    There is a problem with the door lock system. Each time at the end of the cycle, the Wash computer will fulfill a safety test sequence. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 82: Failure Message Overview

    Door close check at start failure Don’t start At start up Door Unload Door lock switch closed failure Don’t start End cycle Table 53  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 83 = reset Connection No Network Connection For Information only Data Transfer Networking Voltage Par Wrong Voltage Range Selection Make correct selection Configuration menu Table 53  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 84: Service Menu

    The SERVICE menu can only be accessed when the machine is in standby (the power is switched on, but no program is started). • The program overview is shown. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 85: Faults Menu (Service Faults)

    Fault Nr. 20: the last - 20 occurred error message. Erase Fault Messages No The Error log is reset by erasing the Fault Messages. Table 54  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 86: Toolbox Menu

    If the Input state is Off, the Input signal is low. 20 Input 20 Off • If the input state is On, the Input signal is high. Table 55  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 87: Diagnostic Program

    The purpose of the diagnostic program is to test the wash ma- in standby (the power is switched on, but no program is started). chine functions one by one. • The program overview is shown. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 88 CFD1438R_SVG Figure 32 • Select diagnostic program. Diagnostic Cycle Program Exit CFD1439R_SVG Figure 33 • Press START if you want to start the diagnostic program. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 89: Test Sequence

    Inlet I8 The machine takes water by inlet 8 Drain 1 The water is drained by drain valve 1 Tumble The tumble sequence Table 56  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 90: Basic Diagnostic Wash Program

    2 mi- Rinse seconds R=3 seconds nutes Spin Spin 4.5 mi- nutes Slowdown 1 minute - Tumble A=12 seconds 30 sec- R=3 seconds onds Table 57 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 91: Troubleshooting

    If the electrical connection is faulty, re- ue in the Payment menu pair it. Enter correct coin value in the Payment menu Table 58  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 92: External Communication Problems

    Failure 3: Safety Switch Activated This error occurs when the safety switch gets activated at revolu- tions lower than the distribution level. I.e. in the wash, rinse, soak © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 93: Failure 4: The Linen Is Not Correctly Distributed In The Stage When The Machine Starts Up The Spinning Sequence

    1/3. tact. Table 61  continues... 2. Check the continuity of the If the wiring is not continuous: wiring. repair the wiring. Table 63  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 94: Failure 7: Door Lock Switch Failure

    1. Check the functioning of the If the door switch is broken or door lock switch. doesn't function correct: re- place the door lock. Table 66  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 95: Failure 10: Target Temperature Not Reached

    X= "Maximum level Overfill", a value that can be programmed at the Initialization menu. The rubber hose must be fixed with a flexible clamp on the electronic water level sensor. . C078 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 96: Failure 13: Heating Failure

    Failure 14: Heating Time Failure When after x minutes the target temperature is not reached (for a machine set as wait for heat): Message 14 will be displayed. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 97: Failure 16: Coin Blocking 1

    If the coin drop micro contact of coin drop 1. or optocoupler is not function- Table 75  continues... ing 100% : replace the coin drop. Table 73  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 98: Failure 24: Defective Level Sensor

    If you see some damage : re- contactor is activated. ken: replace the contactor. ally. place the wash computer. Table 78  continues... Table 77  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 99: Failure 28: Tht (Mitsubishi) Time Out

    This fault message means that at least one of the dedicated inverter parameters is wrong. As a result the inverter will not work in a correct way. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 100: Failure 35: Wrong Software Version

    © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 101: Failure 42: No Network Connection

    Configuration Menu. 3. Check mechanical function- Replace drum door. machine. ality of drum door. Table 89 Table 91  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 102: Failure 77: Time For Heating Blocking Is Out

    In normal operation the On Hold Signal of the Liquid Supply Central Dispensing System must not stay high for more than 1 hour, as otherwise the machine will not finish the running wash cycle anymore. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 103: Failure 107: Not Calibrated

    Refer to Failure 309: OLT-Error (STALL PREVENTION). Err BE Brake transistor Short circuit in brake transistor circuit. Power off immediately! Replace the inverter. Table 95  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 104 Err P24 24VDC short circuit Short circuit on the 24VDC power output (PC terminal). Check for short circuit on the inverter control terminals. Table 95  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 105 Err USB* USB communication error USB communication check time interval has elapsed. Err OS* Overspeed Speed exceeded the limit during encoder feedback control. Table 95  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 106 Replace the motor. are OK. 3. Check if the fault is persis- If the fault is persistent, con- tent tact the manufacturer Table 99  continues... Table 97 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 107: Failure 500-526: Memory Errors

    The error message is displayed when an attempt to read from a USB flash disk fails. Failure 570-571: Card Reader Error Problem with card reader payment system. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 108: Failure 600-628: Software Errors

    Troubleshooting Failure 600-628: Software Errors Software errors must never occur. If a software error message oc- curs inform the manufacturer. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

  • Page 109: Service Information

    / making any inquiries to the manufac- turer. CHM1610R_SVG Figure 35 © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...
  • Page 110 9. Switch the machine power supply on. 10. If the software is compatible with the previous software the new software can be used without re-initialization. © Copyright, Alliance Laundry Systems LLC - Part No. D1676ENR11 DO NOT COPY or TRANSMIT...

This manual is also suitable for:

Pan080xPa25 x controlPy20 x controlPa30 x controlPy25 x controlPa40 x control ... Show all

Table of Contents