Table of Contents
Advertisement
Height-of-Cut Pin
The height-of-cut pin works with the foot pedal to lock
the deck in a specific cutting height. Adjust the height
of cut only when the machine is not moving
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
Specifications
Specifications and design are subject to change
without notice.
48in Mower
Deck
Cutting width
122 cm (48
inches)
Width with
163 cm (64
deflector
inches)
down
Width with
140 cm (55
deflector
inches)
raised
Length
206 cm (81
inches)
Height
122 cm (48
inches)
Weight
356 kg (784
lb)
(Figure
54in Mower
60in Mower
Deck
Deck
137 cm (54
152 cm (60
inches)
inches)
178 cm (70
193 cm (76
inches)
inches)
155 cm (61
170 cm (67
inches)
inches)
206 cm (81
206 cm (81
inches)
inches)
122 cm (48
122 cm (48
inches)
inches)
363 kg (800
370 kg (815
lb)
lb)
Operation
Note:
Determine the left and right sides of the
4).
machine from the normal operating position.
Before Operation
Before Operation Safety
General Safety
•
Do not allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Inspect the area where you will use the machine,
and remove all objects that could interfere with
the operation of the machine or that the machine
could throw.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Check that operator-presence controls, safety
switches, and guards are attached and working
properly. Do not operate the machine unless they
are functioning properly.
•
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operator's position. Allow the machine to cool
before servicing, adjusting, fueling, cleaning, or
storing it.
•
Before mowing, inspect the machine to ensure
that the cutting assemblies are working properly.
•
Evaluate the terrain to determine the appropriate
equipment and any attachments or accessories
required to operate the machine properly and
safely.
•
Wear appropriate clothing, including eye
protection; long pants; substantial, slip-resistant
footwear; and hearing protection. Tie back long
hair and do not wear loose clothing or loose
jewelry.
•
Do not carry passengers on the machine.
•
Keep bystanders and pets away from the machine
during operation. Shut off the machine and
attachment(s) if anyone enters the area.
•
Do not operate the machine unless all guards and
safety devices, such as the deflectors and the
entire grass catcher, are in place and functioning
properly. Replace worn or deteriorated parts when
necessary.
13
Advertisement
Table of Contents
