MAJORITY BARD Instruction Manual page 12

Scanning for stations
The first time you select DAB radio mode, or if the station list is empty, the radio
automatically performs a full scan to see what stations are available. You may
also need to start a scan manually to update the list of stations for one of the
following reasons:
o Available stations change from time to time.
o If reception was not good for the original scan, this may result in an empty
or incomplete list of available stations.
o If you have poor reception of some stations, you may wish to list only
stations with good signal strength.
To start a scan manually, choose Full scan. To scan only stations with good signal
strength, select Local scan.
Once the scan is complete, the radio shows a list of available stations.
To remove stations that are listed but not unavailable, choose Prune invalid.
Turn the navigate reel to view a list of stations and press OK to select. Once
selected, the station plays and the screen show information about station, track
or show as broadcast.
Now playing information
While the stream is playing, the screen shows its name and DLS (Dynamic Label
Segment) information broadcast by the station giving real-time information such
as programme name, track title and contact details. Stereo broadcasts are
indicated with an icon at the top of the screen. To view further information, press
INFO
.
Each time you press INFO , another set of information is displayed, cycling
through DLS text, programme type, ensemble name/frequency, signal
strength/error rate, bite rate/codec/channels and today's date.
Press OK to view the station album in full screen.
Presets – 40 presets available, see section 3 (Presets).
Settings
Dynamic range compression (DRC)
12