Beko SLER 30423SS Owner's Manual page 14

OPERATION
OVEN
TIMER
• The oven timer can be used as a warning
or reminder and operates separately
from the oven functions. It can be used
for any purpose with the oven on or
in standby. The timer can be used in
conjunction with the oven functions and
will not interrupt or change the time set
by the function.
• It can be useful to set the timer as a
reminder to flip items in the oven at
certain time, without interrupting the
timed cycle of an oven function.
SETTING AN ALARM
1. Press '' Timer '' on the touchpad.
2. Using the numeric keypad, enter desired
time period.
3. Confirm selection and start the timer
by touching '' Start '' on the touchpad.
Selection will automatically confirm by
waiting approximately 10 seconds.
4. When the time period reaches "00:00",
an alarm will sound and "Timer" and
"End" will start flashing in the display.
5. To stop the audible alarm, touch any
key on the touchpad.
14
Maximum alarm period is 5 hours and
i
59 minutes. If a value greater than 5:59
is set, the clock will return an error.
CANCEL AN ALARM
1. To cancel an alarm after it has been set,
press "Timer" on the touchpad.
2. Set the time to 00:00, the alarm will be
canceled about 10 seconds later and
'Timer' symbol on display will disappear.
STANDBY POSITION
• Stand-by mode is active when oven has
power. The display shows only time and
cooking function symbols when the
unit is not in use. Neither any indicators
nor any heater elements on the unit are
active at this position.If you wish to make
a programmed cooking operation in the
oven, please follow the steps to activate
the initial set time section.
COOKING TIME SELECTION
• In this operation mode you can adjust
cooking time.
• Put your meal into the oven and close
the oven door.
1. Select the desired oven function. (for
example: Bake)
2. If you want to change the temperature
adjust the temperature using numbers
on the right side while °F or °C is
flashing.