V-TAC OUTDOOR Series Instruction Manual

Led bollard lamp

Advertisement

TECHNICAL DATA

MODEL
SKU
WATTS
LUMENS
INPUT POWER
BEAM ANGLE
ADJUSTABLE ANGLE
CRI
LIFE SPAN
MATERIAL
OPERATING TEMPERATURE
DIMENSION
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the product. The products
are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only.
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
INSTRUCTION MANUAL
OUTDOOR SERIES
LED BOLLARD LAMP
VT-1187
10475, 10476
23051, 23052
4W
390 Lm [@360°Sphere]
AC: 220-240V, 50/60Hz
90°
300°
≥80
20,000 Hours
Aluminium+Glass
-20°C to +45°C
129x159x1000mm
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to
access the manual in multiple languages.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OUTDOOR Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for V-TAC OUTDOOR Series

  • Page 1 129x159x1000mm INTRODUCTION & WARRANTY Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product.
  • Page 2 INSTRUCTIONS FOR THE LIGHT • Please make sure to turn off the power before starting the installation. • Installation must be performed by a qualified electrician. • The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
  • Page 3 INSTALLATION INSTRUCTIONS 1. Turn off the power switch. 2. Pull out the driver module. 3. Connect to the power supply according to the drawing. 4. Fix the base on the ground with the screws. 5. Adjust the angle of the luminair. Replaceable (LED only) 6.

This manual is also suitable for:

Vt-118710475104762305123052

Table of Contents