Download Print this page
V-TAC VT-81003 Instruction Manual

V-TAC VT-81003 Instruction Manual

Led dome light with pir sensor

Advertisement

Quick Links

TECHNICAL DATA
MODEL
SKU
POWER
LUMENS
INPUT VOLTAGE
CRI
TIME DELAY
DETECTION
DISTANCE
DETECTION RANGE
DETECTION
MOTION SPEED
WORKING
TEMPERATURE
IP RATING
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the product. The products
are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only.
Caution, risk of electric shock.
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
INSTRUCTION MANUAL
LED DOME LIGHT WITH PIR SENSOR
VT-81003
23419
12W
1100 Lm
AC: 220-240V, 50/60 Hz
>80
Min. 10sec ±3sec
Max. 3min ±30sec
6M Max (<24° C)
360°
0.6-1.5m/s
-20°C to +40°C
IP20
AMBIENT LIGHT
INSTALLATION
HEIGHT
DIMENSION
This marking indicates that this
product should not be disposed
of with other household wastes.
<3-2000 LUX (Adjustable)
2.2-4M
XXxXX
mm

Advertisement

loading
Need help?

Need help?

Do you have a question about the VT-81003 and is the answer not in the manual?

Questions and answers

Summary of Contents for V-TAC VT-81003

  • Page 1 IP20 INTRODUCTION & WARRANTY Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product.
  • Page 2 WARNING Please make sure to turn off the power before starting the installation. 2. Installation must be performed by a qualified person. 3. The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
  • Page 3 SENSOR INFORMATION Height of installation:2.2-4m Detection Distance: Max.6m TEST • Turn the TIME knob anti-clockwise on the minimum. Turn the LUX knob clockwise on the maxi- mum (sun). • Switch on the power; the lamp will have no signal at the beginning. After Warm-up 30sec, the lamp can start work .If it receives the induction signal, the lamp will turn on.
  • Page 4 TROUBLESHOOTING • The load do not work a. Please check if the connection-wiring of power and load is correct. b. Please check if the load is good. c. Please check if the working light sets correspond to ambient light. • The sensitivity is poor a.