Connecting Your Devices - Hitachi CPWX8 User Manual

Connecting your devices

Be sure to read the manuals for devices before connecting them to the projector.
Make sure that all the devices are suitable to be connected with this product, and
prepare the cables required to connect. Please refer to the following illustrations
to connect them. To input component video signal to COMPUTER IN port, please
see the "Operating Guide" in the CD.
Monitor
RGB IN
L
HDMI S-VIDEO OUT
AUDIO OUT
VCR/DVD/Blu-ray Disc player
WARNING ►Do not disassemble or modify the projector and accessories.
►Be careful not to damage the cables, and do not use damaged cables.
CAUTION ►Turn off all devices and unplug their power cords prior to
connecting them to projector. Connecting a live device to the projector may
generate extremely loud noises or other abnormalities that may result in
malfunction or damage to the device and the projector.
►Use appropriate accessory or designated cables. Ask your dealer about non-
accessory cables which may be required a specific length or a ferrite core by
the regulations. For cables with a core only at one end, connect the end with
the core to the projector.
►Make sure that devices are connected to the correct ports. An incorrect
connection may result in malfunction or damage to the device and the projector.
NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the input
ports of the projector are recessed.
AUDIO OUT
R L R L
VIDEO OUT
AUDIO OUT AUDIO OUT
PC
RGB OUT
AUDIO OUT
RS-232C
Y C /P C /P
R B B R R
COMPONENT VIDEO OUT
L
AUDIO IN
Speakers
(with an
R
amplifier)
7