Table of Contents
Advertisement
23
Find Quality Products Online at:
Camera settings
◦ Disable all: This setting is used to disable the camera lamp, laser, and flash
function.
• Auto power off: This setting defines how soon the camera is automatically turned off.
• User interface options: This submenu includes the following settings:
◦ Auto adjustment region: This setting is used to set the region used for auto image
adjustment. For more information, see section 11.3 Adjusting the infrared image.
◦ Manual adjustment using touch: This setting is used to enable/disable the touch
functionality for manual image adjustments. For more information, see section 11.3
Adjusting the infrared image.
◦ Manual adjustment mode: This setting specifies the type of manual image adjust-
ment mode. Available options are Level, Max, Min and Level, Span. For more infor-
mation, see section 11.3 Adjusting the infrared image.
◦ Emissivity mode: This setting specifies how the measurement parameter emissivity
will be entered. Available options are Select values and Select from materials table.
For more information, see section 11.6 Changing the measurement parameters.
◦ Screening mode: This setting is used to enable/disable screening mode. For more
information, see section 19 Screening alarm.
◦ Color theme: This setting is used to select Light or Dark color user interface theme.
• Volume: This submenu is used to control the volume of the built-in speaker.
• Reset options: This submenu includes the following settings:
◦ Reset default camera mode...: This setting will affect the image mode, color palette,
measurement tools, and measurement parameters. Saved images will not be
affected.
◦ Reset device settings to factory default...: This setting will affect all camera settings,
including regional settings. Saved images will not be affected. The camera will be
restarted and you will be prompted to set the regional settings.
◦ Reset image counter...: This setting will reset the numbering of the image file-
names. To prevent image files being overwritten, the new counter value will be
based on the highest existing filename number in the image archive.
Note When a reset option is selected, a dialog box is displayed with more informa-
tion. You can choose to execute the reset action or to cancel.
• Camera information: This submenu displays information about the camera. No
changes can be made.
◦ Model.
◦ Serial number.
◦ Part number.
◦ Software: The version of the software.
◦ FPGA: The version of the FPGA firmware.
◦ Storage: The used and free space on the memory card.
◦ Lens: The field of view of the lens.
◦ Battery: The remaining battery capacity (in percent).
◦ Calibration: This submenu displays lens–camera calibration information.
– Calibrate lens...: This will start the lens–camera calibration wizard. For more in-
formation, see section 7.15 Calibrating the lens–camera combination.
◦ Register camera...: This will start the registration wizard. For more information, see
section 3.2 Register your camera.
◦ Licenses: Open-source license information.
• Regulatory: Displays regulatory information about the camera. No changes can be
made.
GlobalTestSupply
www.
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
