Sennheiser evolution wireless G3 500 Series Instruction Manual page 25

Using the devices
24
Audio signal is muted
Transmitter's display panel:
Receiver's display panel:
* only when activated on the receiver (see above)
Audio signal is activated (muting is deactivated)
Transmitter's display panel:
Receiver's display panel:
RF signal is deactivated
Transmitter's display panel:
Receiver's display panel:
* only when activated on the receiver (see above)
RF signal is activated
Transmitter's display panel:
Receiver's display panel:
You can also deactivate the RF signal on switch-on. For more information, refer to
the chapter "Switching the devices on/off" on page 18.
Using the ON/OFF
operation. To do so, briefly press the
page 19.
SKM 500
You can deactivate the RF signal on switch-on. For more information, refer to the chapter
"Switching the devices on/off" on page 20.
To deactivate the RF signal during operation:
When one of the standard displays is shown on the display panel, press the
SET
ON/OFF button.
"RX Mute On?" appears on the display panel.
Proceed as described on page 20.
"MUTE"
"TX Mute" is
"MUTE"
"TX Mute" is not displayed
Transmission icon
"RF Mute" is
Transmission icon
"RF Mute" is not displayed
button, you can also activate/deactivate the RF signal during
ON/OFF
is displayed
displayed*
is not displayed
is not displayed
displayed*
is displayed
button and proceed as described on