Sennheiser evolution wireless G3 500 Series Instruction Manual page 14

Connecting an amplifier/mixing console
The receiver's ¼" (6.3 mm) jack socket
Use a suitable cable to connect the amplifier and/or the mixing console to the ¼"
(6.3 mm) jack socket
Via the operating menu, adjust the audio output level
input of the amplifier or mixing console (see page 27). The audio output level is adjusted
¸ ¹
via the operating menu and is common for both sockets.
Connecting receivers in a network
WSM
Connecting the mains unit
Only use the supplied mains unit. It is designed for the receiver and ensures safe operation.
To connect the mains unit:
Insert the yellow connector of the NT 2-3 mains unit
receiver.
Pass the cable of the mains unit through the cable grip
Slide the supplied country adapter
Plug the mains unit
The
¸ and/or the XLR-3M socket ¹.
into a wall socket.
STANDBY button is backlit in red.
Putting the devices into operation
¸ ¹
and the XLR-3M socket
("AF Out") of the receiver to the
into the yellow socket
.
onto the mains unit .
are connected in parallel.
of the
13