Sennheiser evolution wireless G3 500 Series Instruction Manual page 20

SK 500 bodypack transmitter
¸
To switch the bodypack transmitter
¸
Push the two catches
Briefly press the
ON/OFF
The bodypack transmitter transmits an RF signal. The transmission icon
displayed.
The red ON LED
appears on the display panel.
You can switch the bodypack transmitter on and deactivate the RF signal on switch-
on. For more information, see below.
To switch the bodypack transmitter off:
If necessary, deactivate the lock mode (see page 22).
Press the ON/OFF
ON/OFF
¿
ON LED goes off and the display panel turns off.
When in the operating menu, pressing the
(ESC function) and return you to the current standard display.
To switch the bodypack transmitter
operation):
Press the ON/OFF
SET
Press the SET
SET
The transmission frequency is displayed but the bodypack transmitter does not
transmit an RF signal. The transmission icon
tone function is activated on both bodypack transmitter and receiver,
appears on the receiver's display panel.
543.200 MHz
ew500 G3
P
MUTE
AF
¸
µ
on (online operation):
and open the battery compartment cover µ.
ON/OFF button .
¿
lights up and the standard display "Frequency/Name"
button until "OFF" appears on the display panel. The red
ON/OFF
on and to deactivate the RF signal on switch-on
button until "RF Mute
button ¶.
Using the devices
¿
button will cancel your entry
On?" appears on the display panel.
is not displayed. When the pilot
"RF
is
(offline
Mute"
19