Solutions When No Image Appears - Epson V11H389020 User Manual

Solutions When There is No Sound or Low Volume
Solutions to Microphone Problems
Parent topic:

Solutions When No Image Appears

If no image appears, try the following solutions:
• Make sure the lens cover is open or off.
• Press the A/V Mute button to see if the image was temporarily turned off.
• Make sure all necessary cables are securely connected and the power is on for the projector and
connected video sources.
• Press the projector's power button to wake it from standby or sleep mode. Also see if your connected
computer is in sleep mode or displaying a blank screen saver.
• If you unplugged the projector and plugged it right back in, press the power button to turn on the
projector (with Direct Power On enabled).
• Check the settings on the Signal menu to make sure they are correct for the current video source.
• Adjust the Brightness setting or select the Normal Power Consumption setting.
• Check the Display setting to make sure Messages is set to On.
• If the projector does not respond when you press the control panel buttons, the buttons may be
locked. Unlock the buttons.
• If the projector does not respond when you press buttons on the remote control, make sure the remote
receivers are turned on.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Image Quality Settings - Image Menu
Input Signal Settings - Signal Menu
Projector Feature Settings - Settings Menu
Related tasks
Unlocking the Projector's Buttons
Solving Problems
Solving Image or Sound Problems
146