Epson PowerLite 1835 Installation Handbook

Epson PowerLite 1835

Remote Control Operation

The remote control lets you control the projector from almost anywhere in the room, up to 19.7 feet (6 m)
away. You can point it at the screen, or the front or back of the projector.
Make sure that you aim the remote control at the projector's receivers within the angles listed here.
1 30º
2 19.7 feet (6 m)
Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or
the projector may not respond to commands. If you will not use the remote control for a long time,
remove the batteries.
Using the Remote Control as a Wireless Mouse
You can use the projector's remote control as a wireless mouse so you can control your computer
presentation from a distance.
Note: You cannot use the remote control's wireless mouse function when you use your projector's USB
Type B port to project video. However, you can use the Up and Down Page buttons to move through a
presentation.
1. Connect the projector to a computer using the projector's Computer or HDMI port.
2. Using a USB cable, connect the projector's USB TypeB port to a USB port on your computer (for
wireless mouse support).
3. Press the Menu button, select the Extended menu, and select Wireless Mouse as the USB Type B
setting.
4. Start your presentation.
5. Use the following buttons on the remote control to control your presentation:
INSTALLATION HANDBOOK
Remote Control Information
1