Table of Contents
Advertisement
STRUCTURE, FUNCTION AND MAINTENANCE STANDARD
•
Working mode selector switch
The condition of the machine changes accord-
ing to the switch that is pressed (Shown in the
figure at right). It is possible to check the condi-
tion on the working mode monitor display. The
relationship between each working mode and
the monitor display is shown in the table on the
right.
•
Maintenance switch
Check the condition of the maintenance items.
(For details, see MAINTENANCE FUNCTION.)
•
Auto-deceleration switch
Each time the auto-deceleration switch is
pressed, the auto-deceleration function is
switched ON/OFF.
Use the auto-deceleration monitor display to
check the present condition.
When the working mode switch is operated to
switch the working mode, it is automatically set
to ON.
•
Travel speed selector switch
Each time the travel speed selector switch is
pressed, the travel speed changes.
Lo o Hi o Lo ......
Use the travel speed monitor display to check
the present condition.
The relationship between the set speed and the
monitor display is shown in the table on the
right.
•
Wiper switch
Each time the wiper switch is pressed, the wiper
setting changes OFF o INT o ON o OFF o
......
Use the wiper monitor display to check the
present condition.
The relationship between the wiper setting and
the monitor display is as shown in the table on
the right.
•
Window washer switch
While the switch is being pressed, window
washer liquid is sprayed out. There is a time
delay before the wiper starts.
•
Control switch
This is used for control when using the mainte-
nance function or select function.
(For details, see each function.)
•
Display brightness, contrast adjustment switch
Use this switch when adjusting the display
brightness and contrast.
(For details, see each function.)
10-178
Switch that is
Display
pressed
[A]
A
[E]
E
Display
Crawler symbol + Lo
Crawler symbol + Hi
Display
Setting
None
OFF
Wiper symbol + INT
Wiper symbol + ON
MONITOR SYSTEM
Working mode status
after setting
A mode (default)
E mode
Heavy-lift mode
Setting
Low speed (default)
High speed
Wiper actuation
status
Stowing stopped or
now stowing
INT
Intermittent actuation
ON
Continuous actuation
PC600, 600LC-7
Advertisement
Chapters
Table of Contents
