APRILIA PEGASO 650 STRADA TRAIL 2005 Use And Maintenance Book page 20

Settings
When the SETTINGS function is selected
the following options are displayed:
EXIT
TIME SETTINGS
GEAR SHIFT INDICATOR
BACK LIGHTING
CHANGE THE CODE
CODE RECOVERY
UNLOCK SAFETY LOCKS
Once the operation is over, the instrument
panel goes back to main menu.
TIME SETTINGS
This mode allows you to set the clock. The
main page with "CLOCK SETTING" is
displayed.
As soon as you enter this mode, indication
of minutes disappears and only hours are
displayed. Hour value is increased every
time the MODE selector is pressed to the
right, once the value reaches 12 it goes
back to 0. In the same way, hour value
decreases every time the MODE selector
is pressed to the left, once the value
reaches zero, it goes to 12 when the
MODE selector is again pressed to the
left..
A Confirmation signal stores the set value
and lets you go on to minutes setting.
20 use and maintenance Pegaso 650 I.E. STRADA - TRAIL
As soon as you enter this mode, indication
of hours disappears and only minutes are
displayed. Minute value increases every
time the MODE selector is pressed to the
right, once the value reaches 59, it goes
back when the MODE selector is again
pressed to the right.In the same way, value
decreases every time the MODE selector
is pressed to the left, once the value
reaches zero, it goes to 59 when the
MODE selector is again pressed to the left.
A Confirmation signal stores the set value
and lets you quit clock setting mode.
WWW.PlandeGraissage.ORG
3
GEAR SHIFT THRESHOLD
This function allows you to set the value for
the Gear shift indicator threshold. The
m a i n p a g e w i t h " G E A R
THRESHOLD" message is displayed.
Threshold value is increased by 100 RPM
every time the MODE selector is pressed
to the right, vice versa, threshold value is
decreased by 100 RPM every time the
MODE selector is pressed to the left.
If the upper or lower limit is reached and
you further press the selector, nothing will
happen.
Press the MODE selector to the centre
position to end the operation and store the
set value, the index goes back to zero and
t h e i n s t r u m e n t p a n e l g o e s b a c k t o
configuration menu page.
S H I F T